Factory Reset - Cisco Service Manual Service Manual

Cisco TelePresence SX20 Quick Set
Contents

Factory reset

When performing a factory reset the call logs will be deleted
and all system parameters will be reset to default values. All
files that have been uploaded to the system will be deleted.
Release keys and option keys will be preserved.
It is not possible to undo a factory reset.
There are more information about performing a factory reset
in the ► Factory resetting appendix.
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Web interface Web interface
Navigate to: Maintenance > Factory Reset
Perform a factory reset
1. Read the provided information
carefully before you restore the
factory settings by clicking
a factory
2. Click Reset
or Cancel
mind.
Wait while the system resets. The
system will restart automatically
when finished.
System settings
Perform
reset.
to confirm your choice,
if you have changed your
44
Setting passwords
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices