Running A Test - Net research NetProbe 2000 User Manual

12.7.4 Running a Test

• Press
and the screen will switch to the TEST tab and start running each
enabled test using the parameters configured in the Setup tab.
• Observe that the Status displays "Running" and that "In Progress..."
displays next to the active test. Tests that have not started yet display
"Not Started"
•
indicates error and alarms status. Press it to get more details.
• Observe at the bottom of the screen, the details of each iterative test as it
runs, displaying the current frame size, rate, iteration and PASS/FAIL
status.
Icon
Result doesn't meet thresholds
Result meets thresholds
Test in progress
Meaning
201