Introduction - Net research NetProbe 2000 User Manual

3. INTRODUCTION

The NETPROBE 2000 is a lightweight, battery-operated test set optimized for monitoring,
testing and troubleshooting Gigabit Ethernet, PDH(E1, E3) , DS1(T1), DS3(T3), Datacom,
CO-DIR, Wi-Fi, VoIP, IPTV, and IEEE C37.94 telecom services. Depending on the actual
configuration ordered, some of these interfaces will not be available in the tester.
This user manual describes the NETPROBE 2000 and provides instruction on how to set it
up and perform tests.
The NETPROBE 2000 test set is menu driven and operated from a touch panel Graphical
User Interface.
Test results are safely accumulated and stored in the nonvolatile memory.
The NETPROBE 2000 is powered by either an external 12VDC adapter or from the
rechargeable long life Lithium Ion Polymer battery. Depending on the number of applied
recharge cycles the battery does not need replacement for several years. Net Research
factory provides instructions how to reinstall the new battery as self service.
16