Vbrick Iphone App; Overview; Getting The App - VBrick 9000 Series Getting Started Manual

VBrick iPhone App

Topics in this chapter

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Monitoring an Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Running Scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Overview
Note The VBrick iPhone app is used to monitor the status of 7000/9000 Series encoders
only. It does not provide support for VBrick 9000 Series decoders.
VBrick provides an iPhone app which you can use to monitor the status of 7000/9000 Series
H.264 devices. This app lets you perform basic configuration tasks by running predefined
scripts. You cannot modify configuration parameters except by running a script. You can create and
FTP script files that perform common tasks like changing the bit rate or starting a
transmitter. These scripts are associated with the four function keys (F1–F4) on the iPhone
interface. F1 runs script 1, F2 runs script 2, etc. You cannot change the script file names (e.g.
event1Script.txt
to FTP them to the
Command Line Interface on page 44. This topic explains how to find and set appliance
parameters. These are the actual MIB object names you will need to identify in your scripts.
Figure 18. iPhone App Home Page

Getting the App

The VBrick iPhone app is available from the Apple App Store. To get the app simply click on
the App Store icon on your iPhone home page and search for "VBrick" apps. There is no
charge for the VBrick iPhone app.
H.264 Encoding/Decoding Appliance Getting Started Guide
) nor can you add more scripts. After you create the scripts, you will need
folder on the appliance. If you need help creating scripts, see the
scripts
Chapter 10
59