Blade Lcd Display; Installation; Unpacking And Inspection - VBrick 9000 Series Getting Started Manual

Environmental

Blade LCD Display

Each blade has an 8x1 character, mini LCD on the faceplate panel that displays eight
characters at a time and scrolls through informational messages. During boot and POST
processing, the LCD will display appropriate messages. Once the encoder is running
normally, the encoder will cycle through the IP address and various other messages for five
seconds each.
Table 11. Mini LCD Color and Messages
Color Message
Green
Release x.x.x.x
IP:xxx.xx.xxx.x
Yellow
Warning
Red
Failure

Installation

Unpacking and Inspection

Before you do anything else, open the box and inspect the components to make sure you
received everything you ordered. Each shipment comes with the components shown in
Table 12. If anything is missing or damaged, contact VBrick or your reseller at once.
Otherwise install the shelf in a standard 19 in. EIA rack mount chassis.
Note Since the encoder blades are removed from the front, VBrick rack mount units can be
mounted back-to-back (on the same shelf) without consuming additional vertical rack
space. This effectively doubles the density in installations where rack space is an issue.
Table 12. What's in the Box?
9000 Series Blade †
H.264 encoder blades
H.264 Quick Start Guide
H.264 Product CD
Anti-static wrist strap
Serial cable and adapter
Ethernet cable
H.264 Encoding/Decoding Appliance Getting Started Guide
• Standard operating temperature: 5° to 40° C
• Storage temperature: -45° to 85° C
• FCC Part 15 Class A, CE, UL
• EIA Compliant
• RoHS Compliant
Description
Blade is good.
Blade in warning mode. This can include a DHCP failure, a
video input problem, a temperature problem, or an encoder
in limited run mode.
Blade in failure mode. This can include a POST failure, a
hardware failure, or a hardware mismatch.
Number
1–11 per shelf
1 per order
1 per order
1 per order
1 per order
1 per blade
Shelf Setup
21