VBrick 9000 Series Getting Started Manual page 56

The following example shows how the
vbrickProgramTransmitterName
using the Configuration Log. Then open the appropriate MIB file (see Table 20 below) in a
MIB browser. The valid value for this variable is
integer, use a numeric value; if the syntax calls for a string, use an alpha value.
To find the VBrick parameter name and syntax:

1. Find and change the parameter in VBAdmin.
2. Go go to the Monitor > System Logs > Configuration Log and find the name of the
parameter you just changed.
3. Open the appropriate MIB file in a MIB browser and view the syntax. Once you know
the syntax, you can use the correct variable name and value on the Command Line.
46
Transmitter Name
in the MIB. First find the
DisplayString
in VBAdmin is associated with
parameter name
Transmitter Name
. If the syntax calls for an
© 2012 VBrick Systems, Inc.