Configuring Vbdownload - VBrick 9000 Series Getting Started Manual

3. When the
Maintenance Complete
4. Go to
Start > All Programs > VBrick > VBDirectory
VBDirectory program will show all VBrick appliances available for upgrade.
5. Select the device to be updated by highlighting the name and then click the
button. (If the user name and password are not set, a dialog box will appear and you will
need to configure the appliances's username and password (default =
6. In the VBDownload window, if you installed the release to the default directory, that
directory will be auto-selected in the
that contains the unzipped files from the release package.
7. Select a
Revision
VBDownload is
which release components need to be downloaded. When prompted, press
VBDownload to upgrade the suggested components. This may take several minutes.
8. When the download completes, reboot the appliance using the
and follow the prompts.
9. Note that part of the upgrade takes place during the first boot after the download and
may take up to 5 minutes. The upgrade is complete when you can login via VBAdmin or
CLI, or when its name is refreshed in VBDirectory.
10. When done close the window or click
Note To verify the download has successfully installed, check the
Revision

Configuring VBDownload

The VBDownload application is used to upgrade VBrick appliances. When you click on the
setup executable, the application files are automatically installed in
\
Files\VBrick VB9000
devices present, the application will default to the
28
page is displayed, click
and click to start the download. Since the default mode of
OK
Intelligent Download
field on the VBAdmin "Welcome" page.
. If you have both VB6000 Series devices and VBrick 7000-8000-9000
Finish
to start the management utility. The
. If not,
Revision Folder
the utility will query the VBrick to determine
.
Exit
VBrick 7000-8000-9000
.
Upgrade
/ ).
admin admin
to the directory
Browse
to allow
OK
radio button
Reset Unit
Application Code
Program
folder.
© 2012 VBrick Systems, Inc.