Scanner Service Mode; Sp1-Xxx (System And Others) - Ricoh M022 Service Manual

3. Appendix: SP Mode Tables

Scanner Service Mode

SP1-xxx (System and Others)

[Scan NV Version]
1001
Displays the scanner firmware version stored in NVRAM.
3
1001 5 -
[Compression Type]
1004
Selects the compression type for binary picture processing.
1004 1 Compression Type
[Erase margin]
Creates an erase margin for all edges of the scanned image.
1005
If the machine has scanned the edge of the original, create a margin. This SP is activated
only when the machine uses TWAIN scanning.
1005 1 Range from 0 to 5 mm
1009 [Remote scan disable]
1009 1 Enable or disable remote scan.
1010 [Non Display Clear Light PDF] *CTL
1010 1 Enable or disable remote scan.
1011 [Org Count Display]
1011 1 This SP codes switches the original count display on/off.
402
CÓPIA NÃO CONTROLADA
*CTL -
[1 to 3 / 1 / 1/step ]
*CTL
1: MH, 2: MR, 3: MMR
*CTL [0 to 5 / 0 / 1 mm/step ]
[0 or 1 / 0 / - ]
*CTL
0: enable, 1: disable
[0 or 1 / 0 / - ]
0: Display, 1: No display
[0 or 1 / 0 / - ]
*CTL
0: No display, 1: Display
CÓPIA NÃO CONTROLADA