Ipax' Retrieve The Current Ip Address In Use; Ipmx' Retrieve The Current Ip Mask In Use; Ipgx' Retrieve The Current Ip Gateway Address In Use - Zektor HDA604 User Manual

The response string of the 'IPG' command is not the current gateway address of the Zektor Switch, but
the gateway address that will be used the next time the 'IPSET 0' command is issued. To retrieve the
current IP address of the Zektor Switch, use the read only command 'IPGX' (See: "'IPGX' Retrieve
the current IP gateway address in use" on page 60.)

'IPAX' Retrieve the current IP address in use

This command is read only and will return the IP address being used by the Zektor Switch. If DHCP is
being used, this will return the address given to the Zektor Switch by the router. If static mode is being
used, this will return the static address currently in use by the Zektor Switch.
The command format is:
^IPAX ?$
Response String:
^=IPAX xxx,xxx,xxx,xxx$
Where:
xxx,xxx,xxx,xxx

'IPMX' Retrieve the current IP mask in use

This command is read only and will return the IP mask being used by the Zektor Switch. If DHCP is
being used, this will return the mask given to the Zektor Switch by the router. If static mode is being
used, this will return the static mask currently in use by the Zektor Switch.
The command format is:
^IPMX ?$
Response String:
^=IPMX xxx,xxx,xxx,xxx$
Where:
xxx,xxx,xxx,xxx

'IPGX' Retrieve the current IP gateway address in use

This command is read only and will the gateway address being used by the Zektor Switch. If DHCP is
being used, this will return the address given to the Zektor Switch by the router. If static mode is being
used, this will return the static address currently in use by the Zektor Switch.
The command format is:
^IPGX ?$
Response String:
^=IPGX xxx,xxx,xxx,xxx$
Where:
xxx,xxx,xxx,xxx
60
Read the current IP address
= IP address in standard form (Ex: 192,168,001,200)
Read the current IP mask
= IP mask in standard form (Ex: 255,255,255,000)
Read the current TCP/IP router address
= Gateway address in standard form (Ex: 192,168,001,001)
Zektor Switch Serial Protocol, Version 0.16, 5/13/16
Advanced Control