The Hdmi Sources; The Hdmi Switch's Hdmi Video Sources; The Hdmi Switch's Audio Sources And Usage - Zektor HDA604 User Manual

The HDMI Sources

The HDMI switch consists of an HDMI channel and an audio channel. These two channels can be
switch independently for full audio/video breakaway options. The commands for doing this are
explained here: "'HSZ' Set Zone(s) -- HDMI Switch" on page 11.

The HDMI Switch's HDMI Video Sources

The HDMI video section is a full featured HDMI switch with EDID and HDCP Key caching.
There are 16 HDMI possible video sources (depending upon the model).
Setting an HDIM source to '0', will blank its video.

The HDMI Switch's Audio Sources and Usage

The HDMI audio switch has 37 possible sources of the audio:
1-16 These are the audio from HDMI inputs.
17-48 These sources are reserved and currently mute the audio.
49-80 These sources are the coax inputs, input 24 is the auxiliary coax input.
81-96 These sources are the optical inputs, input 33 is the auxiliary optical input.
97-112 These sources are the "audio return" inputs on the HDMI receivers.
113-128These sources are the audio extracted from the HDMI outputs. (This is the same audio that
would be playing on a TV connected to the HDMI output.)
129-145These sources are the analog outputs 1-16.
Audio source '0', is the "disconnected" source. When source '0' is selected, there will be no audio, and
the zone will go silent.
Switch User Guide, Version 0.16, 5/13/16
Using The Switch
23