Example Palladia8X8 - Zektor HDA604 User Manual

would mirror analog output 17 on coax output 19, and the command:
^DSZ @35,129$
would mirror analog output 33 on coax output 35.

Example Palladia8x8

Assuming you have one of our Palladia8x8 HDMI/Audio switch, setting the Extended I/O mode will
change the source numbers as follows:
The Analog switch section:
0
1-9
10-32
33-41
42-64
65-73
74-96
97-104
105-112
113-120
121-128
The HDMI switch section:
0
1-8
9-16
Zektor Switch Serial Protocol, Version 0.16, 5/13/16
= Disconnect HDMI audio from any source (mutes audio).
= Select analog inputs 1-16.
= These will mute audio. There are only 8 analog inputs on the Palladia8x8.
= Select coax inputs labeled 10-18 on the back of the switch.
= These will mute audio. There are only 9 coax inputs on the Palladia8x8.
= Select optical inputs labeled 19-27 on the back of the switch.
= These will mute audio. There are only 9 optical inputs on the Palladia8x8.
= Extract audio from HDMI inputs 1-8.
= Mute audio, there are only 8 HDMI inputs on the Palladia8x8.
= Extract audio from the HDMI outputs.
= Mute audio, there are only 8 HDMI inputs on the Palladia8x8.
= Disconnect HDMI audio from any source (blanks video).
= Select HDMI inputs 1-8.
= These will blank the video, there are only 8 HDMI inputs on the Palladia8x8.
Overview
39