The Proaudio16 (Aud1600) Native Source Numbering; The Proaudio32 & Proaudio48 (Aud3200, Aud3248) Native Source Numbering - Zektor HDA604 User Manual

The ProAudio16 (AUD1600) native source numbering

In the native I/O mode, the sources for the analog audio zones are:
0
1-16
17-32
33-48
The sources for the digital audio zones are:
0
1-16
17-32
33-48
49-64
Note 1: For a complete description of inputs 49-64 see: "PCM-stereo mirroring analog outputs" on
page 38.
Note 2: Only PCM-stereo type audio can be down-converted to analog audio. You cannot down-con-
vert Dolby5.1 or DTS.
The ProAudio32 & ProAudio48 (AUD3200, AUD3248) native source numbering
In the native I/O mode, the sources for the analog audio zones are:
0
1-32
33-64
65-72
The sources for the digital audio zones are:
0
1-32
33-64
65-72
81-96
Note 1: For a complete description of inputs 81-96 see: "PCM-stereo mirroring analog outputs" on
page 38.
Note 2: Only PCM-stereo type audio can be down-converted to analog audio. You cannot down-con-
vert Dolby5.1 or DTS.
36
= Disconnect zone from any source.
= Analog audio from RCA left / right inputs.
= PCM-stereo audio from Coax inputs (mutes if Dolby5.1 or DTS).
= PCM-stereo audio from Optical inputs (mutes if Dolby5.1 or DTS).
= Disconnect zone from any source.
= Reserved. Mutes audio, same as switching source '0'.
= Digital audio from Coax inputs.
= Digital audio from Optical inputs.
= PCM-stereo that mirrors the analog outputs.
= Disconnect zone from any source.
= Analog audio from RCA left / right inputs.
= PCM-stereo audio from Coax inputs (mutes if Dolby5.1 or DTS).
= PCM-stereo audio from Optical inputs (mutes if Dolby5.1 or DTS).
= Disconnect zone from any source.
= Reserved. Mutes audio, same as switching source '0'.
= Digital audio from Coax inputs.
= Digital audio from Optical inputs.
= PCM-stereo that mirrors the 16 analog outputs of the same audio bank.
Zektor Switch Serial Protocol, Version 0.16, 5/13/16
Overview