Example Proaudio16 - Zektor HDA604 User Manual

Example ProAudio16

Assuming you have one of our Proaudio16 16x16 audio switch, setting the Extended I/O mode will
change the source numbers as follows:
0
1-16
17-32
33-48
49-64
65-80
All the other inputs will mute since they don't exist on the Proaudio16.
By using these values in your driver, you can easily substitute a Proaudio32 switch. The source num-
bers to not change in the Extended I/O mode between switches.
40
= Disconnect audio from any source (mutes audio).
= Select analog inputs 1-16.
= These will mute audio. There are only 16 analog inputs on the Proaudio16
= Select coax inputs labeled 17-32 on the back of the switch.
= These will mute audio. There are only 16 coax inputs on the Proaudio16.
= Select optical inputs labeled 33-48 on the back of the switch.
Zektor Switch Serial Protocol, Version 0.16, 5/13/16
Overview