Display Operation Of Display - Mitsubishi GT14 User Manual

POINT POINT POINT
(1) Display setting by GT Designer3
Select [Common Settings]
settings of opening screen time, screen save time and screen save backlight.
To change a part of the setting after downloading the project data, change the setting at the display setting of
GOT.
(2) Screen save time
Using the system information function can compulsorily switch the controller to the screen saving status
(Forced Screen Saver Disable Signal) or disable the screen save time (Automatic Screen Saver Disable
Signal) set with Utility.
(3) Screen save backlight
When [Screen save backlight] is set to [ON], using the system information function (Backlight OFF output
signal) can switch the backlight OFF from the controller.
When [Screen save backlight] is set to [OFF], the above signal has no effect on the screen save backlight.

11.1.2 Display operation of Display

Main menu
( 9.3 Utility Display)
Touch
[GOT setup]
11 - 2
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.1 Display Setting
[GOT Environment Settings]
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Display
[GOT Setup] from GT Designer3 to make the
GOT setup
Touch
[Display]
Touch an item to
change settings