Mitsubishi GT14 User Manual page 131

(2) Clock display
Carry out the display and setting of GOT clock data.
The setup methods of clock data are shown below.
Key
Input numeric value in cursor position.
0 9
to
Move the cursor.
/
Move the cursor to the left by one character when [Del] Key is touched while inputting year, month, day, time, minutes, seconds.
Del
Carry out nothing when touched other than when inputting the above.
Close the keyboard after the input time is displayed in clock display.
The update of the clock display does not restart even if the keyboard is closed.
Enter
The update of the clock display restarts with the operation of
Cancel the input time and returns the time of clock display to the time at which the keyboard was displayed and close the
keyboard.
The update of the clock display does not restart even if the keyboard is closed.
Cancel
The update of the clock display restarts with the operation of
(3) GOT internal battery voltage status
Displays battery voltage status.
Display
Normal
Low/None
When the battery voltage is low, replace the battery immediately.
For battery replacement procedure, refer to the following.
8.3.3 Battery replacement procedure
12. CLOCK SETTINGS AND BATTERY STATUS DISPLAY (TIME SETTING AND DISPLAY)
1.
Touching the clock display section displays the
keyboard for input and stops the clock update.
2.
Input time with the keyboard by referring to the
table below.
Input the scheduled time when the operation of
is to be carried out since the input time is reflected
at the time of the operation of
The day of the week is displayed automatically
according to the input date.
The effective range of clock setting is as follows.
Jan. 1, 2000 to Dec. 31, 2037
Description
.
.
3.
Touching the [OK] button reflects the settings and
restarts updating the clock display.
Then, the settings are reflected to both clock data
on the GOT and controller.
Touching [ ] button restarts the GOT if the clock
settings is changed, or closes the screen if clock
settings is not changed.
Status
Normal
Low voltage
12.1 Time Setting and Display
9
10
.
11
12
13
14
15
16
12 - 3