Talking To Your Colleague With A Speaker Call - Siemens HiPath 4000 OpenStage 10 T Operating Instructions Manual

Enhanced phone functions
Step by Step
j
Enter code!
0
32
Dialing using individual speed dial numbers
Prerequisite: You have configured individual speed dial
numbers
if available:
S
Press the "Station Spd." key. The LED lights up.
or
)
Press the key shown.
Enter the code programmed on your phone for "Station
speed dial"
9
... Press the configured speed dial key.
The connection is immediately established.

Talking to your colleague with a speaker call

You can place a speaker call to an internal party using
the loudspeaker on their telephone. You can also use
the functions under "HiPath 4000 as an entrance tele-
phone system (two-way intercom)"
Prerequisite: A programmed "COM Spk 2way" key is
configured on your phone.
S
Press the programmed "COM Spk 2way" key.
j
Enter the station number.
Z
Wait for the tone.
^
Lift the handset and speak to the party who answers.
If the party to whom you are speaking has acti-
vated "Speaker call protect" on their phone
a normal call.
page 53.
page 68.
page 57, your speaker call will be received as
page 41.