Set Time And Date; Special; User Default Settings; Factory Calibrations - GE Optica Operator's Manual

January 2006

Set Time and Date

Setting
Set Time
Set Date

Special

Setting
The molecular weight of the gas being
Gas Mole Weight analyzed. (The default value is the
molecular weight of air: 28.9645)

User Default Settings

Setting
Restore settings to factory defaults
Restore Defaults
shown in Table 3-2 on page 3-9.

Factory Calibrations

Setting
For factory use only.
5-12
Table 5-13: Set Time and Date Options
Description
Sets the time.
Sets the date.
Table 5-14: Special Options
Description
Table 5-15: User Default Setting Options
Description
Table 5-16: Factory Calibration Options
Description
Available Options
Enter digits, one at a time, pressing
TAB to move to the next digit.
Available Options
Enter a number.
Available Options
NO, YES
Available Options
Programming the 4x40 Optica