Table of Contents
Advertisement
APPL YPTF Procedure
The APPL YPTF procedure applies PTFs to the
library. It is called by the CNF IGSCP procedure,
described following, or directly, by the APPL YPTF
command statement.
PTFs applied by the APPL YPTF are read from a
PTF diskette.
The APPL YPTF procedure evokes the $MAI NT
utility (see index entry:. $MAINT utility program
in the IBM System Control Programming Refer-
ence Manual, GC21-7593).
APPL YPTF Command Statement Format
~
SC1nn
l
[ALL
J
APPL YPTF
RG 1 nn
' PTF I
b
UT1 nn
'
og num er
-J
APPL YPTF Parameters That are Not Prompted
SC1nn
RG1nn
UT1nn
ALL
PTF
log
number
PTFs that change the SCP are applied;
nn is the version number (release
number) of the system.
PTFs that change the RPG II program
product are applied; nn is the version
number (release number) of the product.
PTFs that change the IBM System/32
utilities program product (DFU/SEU/
Sort) are applied; nn is the version
number (release number) of the utility.
Apply all PTFs from the selected PTF
file.
Apply only the PTF corresponding
to the number given. This number is
the PTF log number and is indicated
on the cover letter for each PTF. It
is also indicated in the PTFXREF
source member on each PTF diskette.
Prompted Parameters for APPL YPTF
Translation Required?
YES
NO
PTFs were applied to a translated (non-
English) version of a system.
PTFs were applied to a system that has
not been translated.
SCP PTFs Applied?
If the response to the translation required prompt
was yes, a prompt inquires whether the PTFs
applied were SCP PTFs.
YES
The PTFs applied were from the SC1 nn
file.
CNFIGSCP Procedure
The CNFIGSCP procedure is used for system
configuration. It is distributed with each version
of the system on an SCP diskette and is removed
from the system once system configuration is
complete. The CN F I GSCP procedure prompts the
user for the print belt image, the date format, RPG
II SCP support required, and the existence of a
PTF diskette.
The CNFIGSCP procedure evokes the $MAINT
and $SETCF utilities (see index entries: $MAINT
utility program and $SETCF utility program in
the IBM System Control Programming Reference
Manual, GC21-7593).
NO
The PTFs applied were not from the SC1nn
CNFIGSCP Command Statement Format
file.
$MASPC Replaced?
If the response to the SCP PTFs prompt was yes,
a prompt inquires whether the load member
$MASPC was replaced. The PTF cover letter
distributed with each PTF diskette lists the mem-
bers that will be replaced by the PTFs on the
diskette.
YES
The PTFs applied replaced $MASPC.
NO
The PTFs applied did not replace
$MASPC.
#RDML Replaced
If the response to the SCP PTFs prompt was yes,
a prompt inquires whether the load member
#RDML was replaced.
YES
The PTFs applied replaced #R DM L.
NO
The PTFs applied did not replace
#RDML.
CNFIGSCP
Prompted Parameters for CNFIGSCP
Belt Image Option
48
Sets the print belt image and its length
64
in the system configuration record, a
96
record in the library directory that
defines the system in terms of its com-
ponents. A length of 48, 64, or 96
can be specified.
Note: The serial printer requires a response of 64.
Date Format Option
YMD
Sets the system data format in the system
MDY
configuration record: year-month-day
DMY
(YMD), month-day-year (MDY), or day-
month-year (DMY).
SCP Support For Data Communications
YES
Data communication SCP support is
copied.
NO
Data communication SCP support is
not copied.
Note: The CNFIGSCP procedure prompts you for
data communication options (clocking, tone, and
wrap test) if you specify SCP support for data
communication.
Installation Instructions
C-13
Advertisement
Table of Contents
