Table of Contents
Advertisement
3.2.5 33FD Diskette Drive
Removal and Replacement
The 33FD and its mounting frame should be
removed from the machine when making adjust-
ments, removals, and replacements.
1.
Turn power off at the operator control
panel.
2.
Remove the ground strap
g .
I
DANGER
Be aware of the screws protruding
through the plate at the left side of the.
33FD near the drive pulley.
3.
Turn the locks
II ;
remove the 33FD and
mounting frame from the machine.
4.
Disconnect the cables if power is not
required so unit can be moved to a con-
venient location.
CAUTION
Be sure cables are clear of the bracket
Pl
when replacing 33FD and mounting
frame.
5.
To replace, reverse the above procedure.
Be sure the ground strap is reattached.
33FD Diskette Drive
3-11
- - - - - - -
Advertisement
Table of Contents
