Quick Setup - Panasonic KX-TDA100D Features Manual

2.3.4 Quick Setup

Description
It is possible to set up the basic PBX parameters using a PC. When a PC accesses the PBX for the first time
with the Installer Level Programmer Code (® 2.3.1 PC Programming), Quick Setup display will appear
automatically. The following items can be programmed as desired:
Item
Date & Time
System Password
Operator & Manager
Flexible Numbering
Feature
Extension
Operator
CO Access
CO Dialling Mode
Note that the programmable items may vary depending on the version of Maintenance Console being used.
Parameter
Year/Month/Date/
Hour/Minute
4–10 characters
Extension Number
1.
Type 1
(with )
2.
Type 2
(without )
From 101/from 201
0/9
0/1/9
Pulse/DTMF
Description
The date and time set on the PC will be used.
Enter the system password for installer (®
2.3.3 Password Security).
Assign the PBX operator to all time modes (day/lunch/
break/night) (® 2.2.5 Operator Features). The extension
assigned as the PBX operators is automatically allowed
to perform manager operation (® 2.2.6 Manager
Features).
If "Type 1 (with )" is selected, " " must prefix all feature
numbers (except access numbers) when an extension
user wants to use a feature.
[Example] Call Pickup feature number
Type 1 (with ): 41
Type 2 (without ): 41
For default of the flexible numbers, refer to the [Flexible
Numbering Table (available while a dial tone is heard)]
(® 2.3.6 Flexible Numbering/Fixed Numbering).
Determines the number from which default extension
numbers begin.
The feature number for Operator Call can be selected.
The feature number for Idle Line Access can be selected.
Selects the type of signal used to dial out to the analogue
trunk through LCOT/CLCOT cards.
2.3.4 Quick Setup
Feature Guide 393