Panasonic KX-TDA100D Features Manual page 219

ON
Pattern 11
OFF
ON
Pattern 12
OFF
•
It is possible to set Message Waiting while hearing a ringback tone, busy tone, or DND tone.
•
Messages are always left on the original destination extension, regardless of that extension's FWD settings.
•
Both the extension that sent and received a message waiting notification can cancel the left message.
•
If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left on
the VPS, whether the notification is cleared or not depends on the VPS settings.
PC Programming Manual References
3.3 [1-1] Slot—Card Property - Extension Type—
4.8 [2-6-1] Numbering Plan—Main—Features—
4.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—
4.17 [2-9] System Options
→Option 3—
→Option 5—
5.22 [3-8-1] VM(DTMF) Group—System Settings—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8—
6.5 [4-1-4] Wired Extension—Flexible Button—
6.13 [4-2-3] Portable Station—Flexible Button—
6.17 [4-3] DSS Console—
Feature Guide References
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
User Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
1.10.5 If a Voice Processing System is Connected
10.24 s
t
t=1.28 s
10.24 s
t
t=1.28 s
Dial Tone—Distinctive Dial Tone
SLT—Message Waiting Lamp Pattern
Type
10.24 s
10.24 s
SLT Power Supply
Message Waiting Set / Cancel / Call Back
Message Waiting Set
VM DTMF Command—Listening Message
SLT MW Mode
Type
Type
1.19.1 Message Waiting
20.48 s
20.48 s
Feature Guide 219