Adjusting The Belt Tension At The Main Drive Motor - CAB SQUIX Service Manual

3 Adjustments
24
3.3

Adjusting the Belt Tension at the Main Drive Motor

Danger!
Risk of death via electric shock!
 Before opening the housing cover, disconnect the device from the mains supply and wait at least one
minute until the power supply unit has discharged.
1
1
2
1
Fig. 18 Adjusting the belt tension
1. Unplug the printer from the electrical outlet.
2. Remove the rear cover.
3. Loosen the three fixing screws (1) of the motor (2).
4. Swivel the motor (2) in such a way that the toothed belt (3) is tensioned tightly and tighten the fixing screws (1) in
this position of the motor.
3
24