Installing The Pcb I/O Interface - CAB SQUIX Service Manual

2 Replacing Assembly Units
2.8

Installing the PCB I/O Interface

Danger!
Risk of death via electric shock!
 Before opening the housing cover, disconnect the device from the mains supply and wait at least one
minute until the power supply unit has discharged.
1
2
1
Fig. 10 Installing the PCB I/O interface
1. Unplug the printer from the electrical outlet.
2. Remove the rear cover.
3. Loosen two screws (1)and remove cover (2).
4. Insert the PCB I/O interface (3) and fix it with two screws (1)
5. Connect the cable (4) to the PCB I/O interface (3) and the PCB CPU (5).
6. Mount the rear cover.
3 4 5
15