Rapid 2005 Installation, Operation & Service Manual page 73

Step 12.3.14
Moisture Limiter
Side Cover
Place the moisture limiter inner support rail under the top
flange of the moisture limiter frame side cover and to the top of
the inlet hood. Attach to the top of the inlet hood using nine
#10-24 x ½" bolts and #10-24 nuts. Attach to the side cover of
the frame using two #10-24 x ½" bolts and #10-24 nuts.
Step 12.3.12
For Model 2020: Insert 4 pieces of 12" (30.5 cm) x
96" (243.8 cm) moisture limiter media from the right
side with the long dimension running top to bottom.
For Model 2030: Insert 5 pieces of 12" (30.5 cm) x
96" (243.8 cm) moisture limiter media from the right
side with the long dimension running top to bottom.
Inner Support
Description
Inner Support Rail 13205097 / 13305097
TEK Screw
#10-24 x 1/2" Bolt
#10-24 Nut
Moisture Limiter
Media
Description Part Number
Moisture Limiter Media
SECTION 12: I H
NLET OOD
Rail
Part Number
13404
27000
26098
90740002
63 of 147