Rapid 2005 Installation, Operation & Service Manual page 60

B-S I , O
ERIES NSTALLATION PERATION AND
Step 12.2.8
Double Sided
Filter Rail
Description
Double-Sided Filter Rails
#10-24 x 1/2" Bolt
#10-24 Nut
Snap Fastener
TEK Screw
Attach the double-sided filter rails horizontally to the face of the inlet hood using two #10-24 x ½" bolts and
#10-24 nuts on each side. When attaching the filter rails, insert the bolt from the inside of the filter rail to
allow for maximum clearance for the filters. Attach the snap fastener with one TEK self-tapping screw
each. (First remove the washer as the washer will restrict the snap fastener, making it difficult to open.)
NOTE: Inlet hood with birdscreen does not require filters or snap fasteners.
Step 12.2.9
Caulk the seams between the inlet hood and the air handler/filter section and on the open sides of
the J-bend that lock the roof panels together.
50 of 147
S M
ERVICE ANUAL
Filter Clip
Part Number
13505066
27000
20698
20900
Double Sided Filter Rail
13404
Caulk
Caulk