Rapid 2005 Installation, Operation & Service Manual page 63

Step 12.2.14
Insert the 3 pieces of 12" (30.5 cm) x 60" (152.4 cm)
moisture limiter media from the right side with the
long dimension running top to bottom.
Step 12.2.15
Place the moisture limiter frame side cover in order to have the
flange at the top overlap the top of the frame. Attach to the inlet
hood rain gutter using eight TEK screws. Attach to the bottom
pan assembly and top with two #10-24 x ½" bolts and #10-24
nuts each. Attach front stiffeners to the left and right side of the
moisture limiter frame using four TEK screws for each support.
Moisture Limiter
Description Part Number
Moisture Limiter Media
Outer Support Rail
Moisture Limiter
Side Cover
Description
Side Cover (ML)
Outer Support Rail
TEK Screw
#10-24 x 1/2" Bolt
#10-24 Nut
SECTION 12: I H
NLET OOD
Media
90740001
Part Number
13505099
13505098
13404
27000
26098
53 of 147