Rapid 2005 Installation, Operation & Service Manual page 70

B-S I , O
ERIES NSTALLATION PERATION AND
Step 12.3.8
Install birdscreen mounts into inlet hood opening.
Mount birdscreen into brackets and secure with self
tapping screws and washers.
*For Model 2030 only.
Step 12.3.9
Snap Fastener
Double Sided
Filter Rail
Attach the double-sided filter rails horizontally to the
face of the inlet hood using two #10-24 x ½" bolts
and #10-24 nuts on each side. When attaching the
filter rails, insert the bolt from the inside of the filter
rail to allow for maximum clearance for the filters.
Attach the filter clips with TEK self-tapping screws.
(First remove the washer as the washer will restrict
the filter clip, making it difficult to open.)
NOTE: Inlet hoods with birdscreen does not require
filters or snap fasteners.
60 of 147
S M
ERVICE ANUAL
Screws
Birdscreen
Description
Birdscreen
Birdscreen Mount
Fender Washer
TEK Screw
Description
Double-Sided Filter Rails
#10-24 x ½" Bolt
#10-24 Nut
TEK Screw
A1 Snap Fastener
Part Number
90740052 / 90740053
13205091 / 13305087*
95211550
13404
Part Number
13205066 / 13305066
27000
20698
13404
20900