Rapid 2005 Installation, Operation & Service Manual page 72

B-S I , O
ERIES NSTALLATION PERATION AND
Step 12.3.12
Load filters into the inlet hood, checking
to see that each filter is in the proper orientation
by verifying that the arrow on the side of the filter points in
the direction of air flow. All of the arrows should be
pointing towards the air handler when installed in the
proper orientation. Once filters are installed, close snap
fasteners installed previously (See Page 60, Step 12.3.9)
to hold filters in place.
For inlet hoods with permanent aluminum mesh filters, the instructions end here.
Step 12.3.13
Moisture Limiter Side Cover
Attach side cover of moisture limiter frame to the left side
of the inlet hood drip rail using eight TEK screws. Attach
to the bottom pan assembly with two #10-24 x ½" bolts
and #10-24 nuts.
62 of 147
S M
ERVICE ANUAL
Filter
Description
in
cm 50.8 x 63.5 x 2.5
Permanent Aluminum
Mesh Filter
in
cm 50.8 x 50.8 x 2.5
Description
Left Side Cover (ML)
TEK Screw
Part
Size
Number
20 x 25 x 1
20629
20 x 20 x 1
20628
Part Number
13205078 / 13305078
13404