Omcan IC-CN-0016 Instruction Manual page 9

Installation
up
down
ELECTRICAL REQUIREMENTS
Before you move your ice maker into its final location, it is important to make sure you have the proper
electrical connection: A standard electrical supply (115VAC, 60Hz.), properly grounded in accordance with the
National Electrical Code and local codes and ordinances, required. It is recommended that a separate circuit,
serving only your ice maker, be provided. Use a receptacle which cannot be turned off by a switch or pull chain.
WATER SUPPLY AND DRAIN CONNECTION
The water supply and drain should be roughed in and ready at the point of installation. A wall outlet directly
behind the ice machine will make installation easier.
9