Avaya INDeX 20CC User Manual page 28

Page 28 - Manager-Secretary Setup
Changing the Soft DSS Display Mode
Changing the Soft DSS Extensions
Changing the Soft DSS Usage
INDeX 20CC User's Guide
The display mode sets how many Soft DSS keys you can have; 4 in half-line
mode or 2 in full-line mode. Note that if you change mode from half-line to full-
line, you lose the last two extensions entered.
To set the Soft DSS key display mode:
1. Press PROGRAM, then SCROLL. Press SOFT DSS.
2. Enter the turret's passcode (see page 33).
3. Press MODE. The display shows the current mode.
4. To change mode, press CHANGE.
5. Press DONE. The display goes to extension entry below.
6. Press PROGRAM to finish.
The Soft DSS features only work correctly with extension numbers. Do not set
lines or groups as Soft DSS keys.
To set a Soft DSS key extension:
1. Press PROGRAM, then SCROLL. Press SOFT DSS.
2. Enter the turret's passcode (see page 33).
3. Press EXTNS. to display the first number set.
– To cancel the number, press CANCEL.
– To display the next number, press NEXT.
– To enter a new number, press NEXT until the top-right display goes
blank, then enter the number.
4. Press PROGRAM to finish.
When using Soft DSS Keys to make a call, the usage setting of the two
turrets determines the type of call that occurs (see diagram). The turret's
usage setting affects all of its Soft DSS keys. The system treats extensions
with no Soft DSS Keys as set to NORMAL CALL.
To set the soft DSS key usage:
1. Press PROGRAM, then SCROLL. Press SOFT DSS.
2. Enter the turret's passcode (see page 33).
3. Press USAGE. The display shows the current setting.
4. To change the current usage, press CHANGE.
5. Press PROGRAM to finish.
38DHB0002UKCM - Issue 2 January 2000