Avaya INDeX 20CC User Manual page 24

Turret terminal
Hide thumbs Also See for INDeX 20CC:
Table of Contents

Advertisement

Page 24 - DSS Keys
BLF Status Lamps
DSS Key Label
DSS Key Label Cover:
DSS Key Label Template
INDeX 20CC User's Guide
The DSS keys on 20CC turrets incorporate dual-colour BLF lamps. These
show the status of the number stored under the DSS key.
Red Lamp Signals: Call to/from other extensions.
Slow Flash: Call on line parked at another extension.
Fast Flash: Extension ringing.
Solid: Extension or line busy.
Green Lamp Signals: Calls to your extension.
Slow Flash: Call on line parked at your extension.
Fast Flash: External call ringing your extension.
Solid: Call connected or held at your extension.
Alternate Green/Red Lamp Signals: Pilot number.
Slow Flash: Caller ringing pilot number.
Next to the DSS keys is an area in which you can label each key. You can
remove the label cover to write on the card below.
To remove the label cover:
1. Insert a fine but not sharp point (eg. end of a paper-clip) into one pin hole.
Use this to squeeze the label to the right.
2. Repeat with the other pin hole.
3. Lift the label cover clear and remove the card insert.
To replace the label cover:
1. Replace the card insert.
2. Slide the tabs on the right-hand edge of the label cover into their slots.
3. Bow the label cover to slip the tabs on the left-hand edge of the label
cover into their slots.
A template for printing DSS key labels exists. It can be used with Word for
Windows 2, 6 or 7. Contact your System Manager for a copy of the template,
alternatively you can obtain it from the Lucent Technologies internet site
(http://www.sdxplc.com) and/or from the CD supplied with the turret.
To use the template:
1. Copy the file SDXLABEL.DOT into the Word template directory, i.e. the
directory containing other .DOT files (this varies according to the version
of Word and other Microsoft programs that you use, typically it is the
WINWORD or TEMPLATE directory).
2. Start Word. Select File and then New....
3. From the list of templates select SDXLABEL.
4. Follow the instructions included within the template.
38DHB0002UKCM - Issue 2 January 2000

Advertisement

Table of Contents
loading

Table of Contents