Ethernet Cable Connection - 2N BRI Lite User Manual

Warning
Connecting a defective or inappropriate power supply adapter may lead to

a temporary or permanent 2N
Check whether the antenna is connected before plugging the adapter.

Feeding the device without antenna connection may result in the
GSM module transmitter damage.

Ethernet Cable Connection

®
To connect 2N
cable terminated with RJ-45 connectors (included in the package). The GSM gateway
supports the 10BaseT and 100BaseT standards, the Ethernet connection status is
indicated by the status LED indicators located on the RJ-45 connector (refer to p. 20
for details).
Caution
The Ethernet interface is used for remote supervision and configuration

only, i.e. does not contain the VoIP interface.
With a proper licence, the device provides the VoIP-SIP support.

BRI Enterprise/Lite into the Ethernet network, use a standard straight
Brief Installation Guide
®
BRI Enterprise / BRI Lite error!
2.2
28