Page 1
® 2N OfficeRoute UMTS Gateway User Manual Version Firmware 2.3.20 www.2n.cz...
Page 2
2N TELEKOMUNIKACE administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services. On www.faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures „What to do if...“.
User manual 2N® OfficeRoute v1.9 Content: 1. Product Overview 1.1 Product Description 1.2 Changes 1.3 Terms and Symbols Used 2. Description and Installation 2.1 Product Description 2.2 Before Installation 2.3 Mounting 2.4 PC Connection and LAN Connection 2.5 Antenna Connection 2.6 SIM Card Insertion...
Page 5
Šindelář Radek, 2N view change 4.2 Messaging updated by about 2 hours ago Šindelář Radek, 2N view change User manual 2N® OfficeRoute v1.9 updated by Brigádník TestTeam 01, 2N view change about 5 hours ago 6.3 General Instructions and Cautions updated by...
In this section, we introduce the OfficeRoute/2N VoiceBlue Enterprise, outline its application options and highlight the advantages following from its use. Here is what you can find in this section: 1.1 Product Description 1.2 Changes 1.3 Terms and Symbols Used ® TELEKOMUNIKACE a.s., www.2n.cz...
This helps you find out easily why your bill is higher than it should be The Least Cost Router is flexible enough to help you set rules for GSM/UMTS/SIP/H.323 calling at the lowest possible operation costs ® TELEKOMUNIKACE a.s., www.2n.cz...
(in the neighbouring building, e.g.) and an Ethernet cable may be carried from the system gateway to the original building. ® Although OfficeRoute is not intended for aeroplanes, all relevant prohibitions and regulations regarding mobile phones apply to them here ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 9
Caution The manufacturer constantly improves the software contained in the product (the so-called firmware). The technology used ® therein helps you download the latest firmware version to 2N ® OfficeRoute/2N VoiceBlue Enterprise anytime using a standard PC. For the latest firmware version see www.2n.cz...
Always abide by this information to prevent persons from injury. Warning Always abide by this information to prevent damage to the device. Caution Important information for system functionality. Useful information for quick and efficient functionality. Note Additional information. ® TELEKOMUNIKACE a.s., www.2n.cz...
Here is what you can find in this section: 2.1 Product Description 2.2 Before Installation 2.3 Mounting 2.4 PC Connection and LAN Connection 2.5 Antenna Connection 2.6 SIM Card Insertion 2.7 Status Indicators 2.8 Console Access ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 12
2.1 Product Description ® ® Before you start installing your OfficeRoute/2N VoiceBlue Enterprise , please get familiar with its physical structure, arrangement of connectors and status indicators. Figure 2.1: Bottom View Figure 2.2: Top View ® TELEKOMUNIKACE a.s., www.2n.cz...
IP address 192.168.1.1. Setting and monitoring – having set the basic network parameters (IP ® ® address, etc.), you can configure 2N OfficeRoute/2N VoiceBlue Enterprise using a standard web browser (http or https). Configuration options and essential procedures shall be discussed in detail in the respective sections.
The device is not designed for high-vibration environments, e.g. means of transport, machine rooms, etc. Free space has to be left under and over the device for cables and agitated air to remove operational heat. Install the device on a place with a good UMTS/GSM signal. ® TELEKOMUNIKACE a.s., www.2n.cz...
The hazard is higher than with mobile phones because the device is usually used by many people and thus employed more often. Gateway Power Supply ® ® Be sure to use only the mains adapter that is included in your 2N OfficeRoute/2N VoiceBlue Enterprise delivery. Caution Before plugging in the device, make sure that the mains voltage value meets the data given on the mains adapter label.
PC USB port with the cable enclosed and select the basic network parameters using your console interface. After the gateway is connected using the USB ® cable, the PC detects new hardware. You have to choose the driver for 2N OfficeRoute , available on the CD in the package.
® OfficeRoute/2N VoiceBlue Enterprise is connected to the 10/100BASE-T (Twisted Pair Ethernet) LAN using a standard straight (non–crossed) cable terminated with RJ-45 connectors like other types of equipment (PC, etc.). Figure 2.7: PuTTY – LAN Connection ® TELEKOMUNIKACE a.s., www.2n.cz...
2.5 Antenna Connection ® No matter whether equipped with one UMTS and one, two or three GSM modules, 2N ® OfficeRoute/2N VoiceBlue Enterprise has just one SMA antenna connector, to which an external antenna cable is connected. This external antenna should be installed vertically on a place with a good UMTS/GSM signal.
Insert your SIM card in the device and fix it with a small lock (move the lock over the inserted SIM card). Caution You cannot replace SIM cards with your device on. Figure 2.9: SIM Card Inserting Procedure ® TELEKOMUNIKACE a.s., www.2n.cz...
If the LED is off, you can make calls and send SMS via the respective module. The respective module LED flashes green quickly during call set–up or data connection in the case of UMTS module. When the connection has been established successfully, the indicator remains green during the whole call. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 21
SIM card initialisation in progress or no SIM card is in the Red light drawer. Yellow/Orange light The SIM is not logged–in to any GSM network. Quick green A call is being set up (dialled). blinking Data connection active. Green light A call is being made. ® TELEKOMUNIKACE a.s., www.2n.cz...
2.8 Console Access ® ® You need a direct interconnection of your 2N OfficeRoute/2N VoiceBlue Enterprise gateway and PC especially when you do not know the gateway IP address and thus cannot configure it using a web browser. Also you can configure the DHCP server in the gateway or the VRRP function.
Page 23
String – Arbitrary number of characters. The acceptable value interval may be included in the prompt. Enter a hostname from 1 to 32 characters: OfficeRoute Integer – Decadic integral number. The acceptable value interval may be included in the prompt.
Page 24
Command line – Set/change basic telephony settings – LCR, routes, SIP, devices, calls, DISA. States – States of devices (signal strength, registration status, etc.) and calls. Reboot – This option restarts the device. Settings – DHCP and VRRP server settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 25
® Connect to your OfficeRoute via the Telnet type telnet <your OfficeRoute IP address> in the command line. ® If successful, OfficeRoute will require authentication from you. To log in, use the ®...
This section describes the web browser configuration. Here is what you can find in the section: 3.1 Web Browser Configuration 3.2 Web Access 3.3 Survey of Group Tags and Menus 3.4 Network Settings 3.5 User Management 3.6 Telephony Services 3.7 Administration ® TELEKOMUNIKACE a.s., www.2n.cz...
Enter a new administrator password for login to the web interface. It is important to change the password to ensure your data security. The administrator username is Admin. Store your password (default = 2n) by clicking on the icon in the navigation bar.
Page 28
SIM card, it is unnecessary to enter the PIN. After setting the PIN codes the gateway will restart. Please wait for the restart to complete and once again retrieve the set-up wizard page. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 29
SIM1 position. If, in the future, you insert a different SIM card, it is always necessary to restart the equipment. Insert the cards for GSM voice calls in the remaining positions. Figure 3.5: Configuration Wizard – Data Connection ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 30
After closing the wizard, you can change the password any time by entering User management Caution Every active extension must have a password for security reasons. Do not leave the Password field empty. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 31
Figure 3.7: Configuration Wizard – Passwords for Extensions 7. Outgoing Calls through VoIP Provider ® To use OfficeRoute – for outgoing calls through a VoIP provider (it is necessary to have an allocated user account), enter the requested information as follows: SIP server address –...
Page 32
Select where incoming calls should be routed. If you select To DISA line, a welcome note will be played and the caller can choose an extension number. If you select To extension, incoming calls will be directed to the extension you have selected. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 33
10. Finish ® OfficeRoute is now ready for use. Figure 3.11: Configuration Wizard – Finish Note If you want to use the wizard again, you have to perform the 2N ® OfficeRoute factory reset (see chapter 4.3 ® TELEKOMUNIKACE a.s., www.2n.cz...
Obrázek 3.12: Web Administration Login Page By default: The Username is Admin Password is 2n. Caution The manufacturer supplies the gateways with a predefined default IP address 192.168.1.1...
Page 35
The tag settings are arranged in two menu levels. By selecting a Level 1 item you display the respective Level 2 subitems. If the Level 1 item contains no more subitems or if you select a subitem, the appropriate application form gets displayed on the remaining window space. ® TELEKOMUNIKACE a.s., www.2n.cz...
Parameters or new values can be added by clicking on the plus icon , modified by the pencil icon , reset by the icon, removed by the icon with a red dart saved by clicking on the diskette icon ® TELEKOMUNIKACE a.s., www.2n.cz...
DNS1 – Set the IP address of the first DNS. DNS2 – Set the IP address of the second DNS. Click on Modify to confirm the changes. Setting new values takes some time; please wait for the browser response. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 38
It is a transparent process where the network clients cannot see that port forwarding is being done. This process enables you to run a public Internet service on a machine that is otherwise hidden from the Internet by your gateway. Example: ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 39
Start address – Start of an IP address pool. End address – End of an IP address pool. Subnet option – Subnet mask for an internal network. ® Router option – Default gateway of subnet (typically the 2N OfficeRoute/2N ® VoiceBlue Enterprise IP address, for VRRP it is the IP address of the virtual router.
Page 40
UMTS/GPRS router. The DSN proxy can receive DNS queries from the local network and forward them to an Internet Domain Name Server. If the DNS Proxy is ® disabled, the gateway forwards all requests to the servers assigned by the UMTS (2N ® OfficeRoute...
Page 41
As a detailed example, the IP address can be 123.234.111.112 one day, 123.124.45.15 the next, but the Dynamic DNS address will always be, e.g. - office-route.dyndns.org. Figure 3.20: Dynamic DNS Configuration Hostname – Your hostname registered with a DDNS provider. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 42
Write – private Read – public Traps enabled – Enable traps for Calls, LCR and GSM. Data Connection In this menu you can see the list of inserted SIM cards and start/stop data connection by clicking on Connect/Disconnect ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 43
3. Click on the icon in the right-hand bottom corner to re-read the page. Figure 3.22: Data Connection – SIM Cards Modification of SIM Card Parameters To modify the data connection settings click on the pencil icon. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 44
SIM cards. If you fill in the proper USSD code and the SIM card is prepaid, you can obtain credit information by clicking on Get credit in the SIM cards list. Last USSD message – Shows the last obtained USSD message. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 45
Connection Speedometer This section shows the data receiving (download) and sending (upload) rate, the currently used data transmission technology and the signal intensity value for each module. Figure 3.24: Connection Speedometer ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 46
Two speedometers are displayed: the one on the right shows the download rate and the one on the left the upload rate. The counter below the indicators displays the count of received or sent data since the last connection. ® TELEKOMUNIKACE a.s., www.2n.cz...
USB cable or a serial console, change the Admin password (it is not necessary to know the old one). Add User To add a new user/extension click on the Add user icon in the right-hand bottom corner. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 48
Line number UID (number of extension/SIP name). Description – User description. MOBILITY EXTENSION Outgoing ME enabled – Enable/disable the outgoing Mobility Extension (ME) function for the selected user. Outgoing ME number – Enter the ME number. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 49
Administrators – is a group with all rights enabled. SMS – is a group with the SMS rights enabled only. Add Group To add a new group click on the Add group icon in the right-hand bottom corner. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 50
Use digital characters for the group name only as the group name is identical with the group telephone number. Obrázek 3.29: Ring Group Adding Form Tick off the checkboxes to assign the extensions and their Mobility Extension numbers to the members of a new ring group. ® TELEKOMUNIKACE a.s., www.2n.cz...
To do this, you have to know the full ID of the terminal to be called, i.e. also the IP address and destination port, of course. This is the main disadvantage compared with the preceding model for multiple-telephone locations. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 53
Figure 3.32: VoIP-to-GSM Gateway with PBX It can even replace the PBX completely for SIP telephones because it is equipped with an integrated SIP proxy. This simplifies the VoIP network structure as shown in Fig. 3.33. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 54
® Figure 3.33: 2N OfficeRoute as SIP Proxy Although call interconnection between VoIP and GSM networks is the primary function ® ® OfficeRoute/2N VoiceBlue Enterprise , the gateway can also be used for bridging VoIP networks with different signalling standards – SIP and H.323. For such arrangement see Fig.
Page 55
Figure 3.35: Call Routing by VoIP PBX The routing options are dependent on the capabilities of the particular PBX. For ® ® SIP-based telephones, a SIP proxy server built in 2N OfficeRoute/2N VoiceBlue Enterprise can be used as a PBX.
Page 56
Incoming Calls from GSM ® ® A special routing mechanism is applied to calls coming to the 2N OfficeRoute/2N VoiceBlue Enterprise gateway from GSM networks. Figure 3.37: Routing of Incoming Calls from GSM As selected, the GSM router: forwards the call to a fixed operator;...
Page 57
Figure 3.38: List of SIP Lines Modify SIP Line To make calls out of the SIP proxy you have to modify the internal SIP line ID [16]. To make a trunk to a VoIP provider create a new SIP line. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 58
Figure 3.39: Modify Internal SIP Line ® ® SIP server address – Change the default IP to the 2N OfficeRoute/2N VoiceBlue Enterprise IP address for internal SIP line. While creating a new line, enter the IP address of your VoIP provider. If a port other than 5060 is to be used (for provider or proxy), it should be specified behind a colon (192.168.22.63:5071).
Page 59
H.323. It could be set only one H.323 line, but it can transfer more calls at the same time. This line can log in to the Gatekeeper or communicate directly with VoIP telephones or other gateways. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 60
Gateway prefix(es – the prefixes used by the gateway for registration. Endpoint type – the gateway can register itself to the Gatekeeper either as a gateway for a prefix (destinations starting with the prefix are routed through the ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 61
Thus, if the SIM card is reinserted, the parameters need not be reset. The list of cards with available configuration parameters is displayed in a table on the introductory page of the SIM card configuration. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 62
Last USSD message – Shows the last obtained USSD message. Description – Text entered by the administrator. By clicking on the pencil symbol you get into the line setting detail and can change the settings. The cross is used for deleting a line. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 63
'Get credit' in the SIM card list. Last USSD message – Shows the last obtained USSD message. Last USSD message timestamp – Shows the last USSD message timestamp. Roaming disabled – Disable/enable roaming for the given SIM card. Roaming is ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 64
SIM cards by default and has to be enabled if necessary. Description – User description of the SIM card. Service Centre Number – Enter the Service centre number. It is necessary for SMS sending. In order to use the SIM for data/Internet connection (for GPRS/EDGE/UMTS/HSPA - 2N ® ® OfficeRoute...
Page 65
To add a new fax line use the Add icon below the form. To modify an existing line click on the Modify icon. Upon the click, the entered data are confirmed and the execution of the relevant operation is requested. ® TELEKOMUNIKACE a.s., www.2n.cz...
Description – Any text describing the meaning of an item. Note For examples of FAX settings refer to faq.2n.cz Note ® The Fax line is implemented only with 2N OfficeRoute FXS Line Note ® The Fxs line is implemented only with 2N OfficeRoute This line is set by the wizard.
Page 67
You can define the microphone gain and the speaker gain for each module. The range is from -24dB to +12dB for UMTS module and from -24dB to +42 dB (0dB) for GSM modules with a 1dB step. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 68
Delete record for connected answer – Check off this option to delete a record in the CLIP routing memory after a successful call. Add only missed calls – Check off this option to add missed calls only to the ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 69
To enable the ME function, just send the following SMS to gateway: *<Service code> To disable the ME function, send: #<Service code> The gateway responds with a confirmation SMS. Figure 3.51: Services ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 70
ME calls. Mobility Extension DISA line – DISA message for outgoing calls. Note For examples of Mobility Extension settings refer to faq.2n.cz Note ® The FAX configuration is implemented in 2N OfficeRoute only. ® ® OfficeRoute/2N VoiceBlue Enterprise also provides the FAX function, supporting T.38.
Page 71
Image data redundancy – Image redundancy. ® ® The Least Cost Router (LCR) is 'the brain' of OfficeRoute 2N VoiceBlue Enterprise . All call routing rules (inbound and outbound) can be set there. The purpose of the Least Cost Router is to find the optimum output line for the called number.
Page 72
(greyish). They will not become active until one routing rule at least is selected by putting the checkmark in the second column of the respective line. By pushing the button activated in this way you get executed the operation above the routing rules selected. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 73
Priority type n – Priority for the lines defined in the chosen route. There are following options First free – Call will use the first free line, according to the order of lines inside the route. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 74
There is a possibility to define the time interval (condition) for using a LCR route. The default time intervals are 'weekdays', 'weekend' and 'workdays'. It is also possible to define a certain time range. Figure 3.56: Time Intervals ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 75
Figure 3.58: Normalisation – Add Rule The meanings of the fields in the form are identical with the following columns of the normalising table Line – Define to which line the rule should be applied. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 76
Tariff Metering ® ® Call tariff metering (AOC) in the OfficeRoute 2N VoiceBlue Enterprise gatew ays is a sophisticated recording of the called time for each SIM card. Monitoring of free minutes is made with the aim to cut tariff costs and optimise the LCR process. The tariff-metering scheme divides a call into two time ranges.
Page 77
Description – Any text that describes the meaning of an item. Routes This window includes the list of existing routes and the route adding and removing options. A route means an outgoing trunk (bundle of SIMs, modules, SIP lines or DISA lines). ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 78
Put a raw with empty CLIP field at the end of the table to route calls when no CLIP match was found (unknown CLIP). Don't create that raw if you want to deny calls with unknown CLIP. Figure 3.62: LCR Test Description – Any text describing the meaning of an item. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 79
Finally, the calling number is normalised according to the normalising table. Operator To set routing click on the GSM routing reference. The Operator service must be set first. Click on the Operator item to display the table of available operators (see Fig. 3.64). ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 80
To remove an Operator service, select the relevant line (as mentioned above) and click Remove Click on the SIM item in the menu to the left to display the list of SIM routing rules (see Fig. 3.66). ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 81
If the GSM routing rule is set together with the SIM rules (see later), the GSM rule has a higher priority. Click on the item in the menu to the left to display the list of GSM routing rules. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 82
If, e.g., the gateway is configured to dial the calls into the GSM network by means of prefix 0 and the incoming CLIP from GSM network starts with +420, the prefix +420 must be detached and replaced by 0 (see Fig. 3.70). Example: ® TELEKOMUNIKACE a.s., www.2n.cz...
The SIP proxy routing rules define routing (according the prefix of the dialled number). There are 2 rules by default - all dialled numbers with prefix 0 are routed to the internal SIP line and the remaining are to be looked up for registered IP phones. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 84
LCR, Reject, Change host and port and Lookup registration. The parameter means here the routing destination of a call. There is a significant difference against the Normalising table – the prefix is not removed in the proxy rule. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 85
If the SIP proxy server is switched off, it may be switched on by clicking on Switch SIP Proxy on menu item. Registrations It is possible to monitor via the web interface which equipment units are registered at the SIP proxy. ® TELEKOMUNIKACE a.s., www.2n.cz...
Simple login page – Check off this option to enable a simple login page. ® SIP proxy port – define port which is used for communication between 2N OfficeRoute proxy and SIP terminals. The default port is 5060. Caution...
PC time. Figure 3.75: Main Configuration – Synchronise Time Update Firmware ® ® The firmware update helps you exchange the 2N OfficeRoute/2N VoiceBlue Enterprise firmware version. For updating, the firmware delivered by the gateway producer, or the firmware loaded from the producer's websites has to be used exclusively.
While uploading configuration you can check the 'Do not extract licence' item in order not to overwrite the gateway licence by the licence saved in the backup file. Figure 3.78: Main Configuration – Configuration Backup Figure 3.79: Main Configuration – Upload Configuration ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 89
Reboot Reboot the device. The rebooting process takes approximately 3 minutes. Figure 3.80: Main Configuration - Reboot ® TELEKOMUNIKACE a.s., www.2n.cz...
4. Function and Use This section describes the basic and extending functions of the product. Here is what you can find in the section: 4.1 States and Logs 4.2 Messaging 4.3 Factory Reset ® TELEKOMUNIKACE a.s., www.2n.cz...
4.1 States and Logs States ® ® This menu provides information on all 2N OfficeRoute/2N VoiceBlue Enterprise devices, registered VoIP extensions, calls and tariff metering states. Tariff Metering The list of available tariffs and usage of free minutes/SMS are displayed. Click on in the right-hand bottom corner to restore the calling and SMS limit.
Page 92
The names of the closed files correspond with the respective period of time. To display the list of saved call data files open the Call accounting menu in the States and Logs tags. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 93
Gateway Serial No – If checked, each CDR will include the serial number of the gateway. To delete report – Specify a rule for deleting old CDR files. Each file row corresponds to one call. For an example of a record see below. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 94
Warning – Events that should not occur normally but their presence has no effect on the gateway behaviour. Error – Errors that limit or jeopardise the gateway function. Their occurrence usually signals an approaching fatal error. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 95
The files can be closed at the end of a defined period of time (day, week, or month) or when the specified size is achieved. Debug log level – Define which tuning record categories shall be recorded. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 96
To download packed log files click on Download Figure 4.8: Download Logs Connection Speedometer In this section you can check your uploading and downloading speed. For more details refer to Subs. 3.4 – Network Settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 97
4.2 Messaging ® ® Thanks to an integrated SMS server, the 2N OfficeRoute/2N VoiceBlue Enterprise gateway is capable of not only sending but also receiving and delivering SMS. Sending of SMS messages from the web interface. Every user with SMS rights can log in and send or receive SMS.
Page 98
SMS Delivery ® ® OfficeRoute/2N VoiceBlue Enterprise 's internal POP3 server provides SMS downloading from the gateway via e-mail. SMS sending/receiving settings. The settings apply to both the web and SMTP/POP3 SMS sending/receiving ways. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 99
Figure 4.11: SMS – SMS Delivery The form contains the following fields Parse contents – Enable SMS delivery according to the contents. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 100
SMS by e-mail. SMTP authentication required – Authentication goes through the username ® and password, which are used for registering to the web-based interface of 2N OfficeRoute . Every SMS will be changed to e-mail in the Inbox directory after successful authentication.
Page 101
Multipart/Alternative formats. From a Text/HTML message only the body of the HTML message, without formatting, is put in the SMS message. From Multipart/Mixed and Multipart/Alternative messages only the first part of the message is used, enclosed between strings, mentioned in the header under the name 'boundary'. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 102
The SMTP server enables the sender IP address control as well as authentication. With the help of the web-based interface you can enable or disable the IP address control as well as set the list of allowed IP addresses. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 103
SMS statistics for a selected user, or delete statistics of delivered, sent and other SMS for all users. The cross in the right-hand bottom corner of the table deletes all SMS statistics in the SMS storage. Figure 4.14: SMS Storage Statistic ® TELEKOMUNIKACE a.s., www.2n.cz...
Push and hold the Factory reset button. Connect the gateway to the power supply. Keep pushing the Factory reset button for at least 20 seconds. After these steps the factory reset is executed. Figure 4.15: Factory Reset Button ® TELEKOMUNIKACE a.s., www.2n.cz...
5. Technical Parameters This section describes the technical parameters of the product. 5.1 Technical Parameters ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 106
Interface type 2-wire analogue, FXS Telephone connector type RJ12, 6/6 Call impedance 600 Ω Loop voltage 50V DC Loop current max. 40mA Tone frequency 425Hz Dialling type tone (DTMF) Ringing voltage 45Vef 30Hz Answer supervision Polarity reversal ® TELEKOMUNIKACE a.s., www.2n.cz...
6. Supplementary Information This section provides supplementary information on the product. Here is what you can find in this section: 6.1 Regulations 6.2 Troubleshooting 6.3 General Instructions and Cautions ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 109
76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ® TELEKOMUNIKACE a.s., www.2n.cz...
The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff. ® TELEKOMUNIKACE a.s., www.2n.cz...
Make sure that the devices to be disposed of are complete. Do not throw battery packs into fire. Battery packs may not be taken into parts or shirt-circuited either. ® TELEKOMUNIKACE a.s., www.2n.cz...
Need help?
Do you have a question about the OfficeRoute and is the answer not in the manual?
Questions and answers