2N BRI Lite User Manual
  1. Manuals
  2. Brands
  3. 2N Manuals
  4. Gateway
  5. BRI Lite
  6. User manual

2N BRI Lite User Manual

Bri-voip-gsm/umts gateway
Hide thumbs Also See for BRI Lite:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
®
2N BRI Lite/Enterprise
BRI-VoIP-GSM/UMTS Gateway
Version
1.3
Firmware
1.5.0
User Manual
www.2n.cz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BRI Lite and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for 2N BRI Lite

Summary of Contents for 2N BRI Lite

  • Page 1 ® 2N BRI Lite/Enterprise BRI-VoIP-GSM/UMTS Gateway User Manual Version Firmware 1.5.0 www.2n.cz...
  • Page 2 2N TELEKOMUNIKACE administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services. On www.faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures „What to do if...“.

  • Page 3: Table Of Contents

    3. Making Calls via BRI Gateway ......31 3.1 Supported 2N BRI Gateway Functions ....... . 32 3.2 Call Routing Principles .
  • Page 4 7. Technical Parameters ....... 91 8. Supplementary Information ......93 8.1 Directives, Laws and Regulations .

  • Page 5: Product Overview

    1. Product Overview ® In this section, we introduce the BRI Lite / Enterprise product, outline its application options and highlight the advantages following from its use. Here is what you can find in this section: 1.1 Product Description 1.2 Safety Precautions 1.3 Upgrade...

  • Page 6: Product Description

    (on an enclosed CD), or using the AT commands. Programmable parameters are pre–set to make it possible to make calls as soon as the supply cable, antenna a SIM cards are connected. 2N® BRI Enterprise / 2N® BRI Lite Differences 2N® BRI Enterprise 2N® BRI Lite...
  • Page 7 ® 2N BRI Enterprise / 2N® BRI Lite Basic Features Integration of the best features of two communication technologies: ISDN and VoIP–SIP telephony support with G.711a/u and G.729ab codecs Intelligent routing of incoming and outgoing calls Web interface for gateway configuration and SMS sending/receiving...
  • Page 8 SMS to the provider (in the case of line unavailability, e.g.). ® BRI Lite GSM gateway contains just one ISDN BRI port and thus cannot work in the DialThru mode. It can be connected to a PBX on a trunk line or extension and route calls to the GSM/UMTS networks only –...

  • Page 9: Safety Precautions

    ® It is prohibited to use the BRI Enterprise / BRI Lite GSM gateways at petrol stations where mobile telephones are also prohibited. GSM phones may affect sensitive life–saving devices in medical centres. Therefore, it is forbidden to use GSM/UMTS devices, including the GSM gateways, in such facilities.

  • Page 10: Upgrade

    The manufacturer reserves the right to modify the product in order to improve its qualities. In response to the customers' requirements, the manufacturer constantly improves the ® software contained in the product (firmware). For the latest 2N BRI Enterprise / 2N® BRI Lite firmware version and the User Manual refer to the 2N web sites ®...

  • Page 11: Terms And Symbols Used

    Useful information for quick and efficient functionality. Note Routines or advice for efficient use of the device. Future Functions, Innovations grey-marked text in this document designates the functions that are under preparation or development at present. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 12: Description And Installation

    Here is what you can find in this section: 2.1 Before You Start 2.2 Brief Installation Guide 2.3 Available ISDN BRI Extension Configurations 2.4 IP Voice Transmission 2.5 Types of 2N® BRI Enterprise Connection ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 13: Before You Start

    Caution Make sure that you are equipped with all system components necessary for putting 2N® BRI Enterprise / Lite in operation (SIM card, ISDN phone and/or duly configured ISDN BRI line of your PBX or PSTN, an available Ethernet/USB socket and a PC for initial gateway configuration).
  • Page 14 (NT/TE) and the interconnecting cable (cross/straight). Connector Lay–Out – Upper Side ® There are SMA female antenna connectors to each GSM/UMTS module on the 2N Enterprise / Lite upper side. Status LED Indicators – 2N® BRI Lite ®...
  • Page 15 –81dbmfour segments = more than –65dbm *If the devices have been interconnected, the layers will not be connected until the first call. Status LED Indicators – 2N® BRI Enterprise ® BRI Enterprise status is indicated by five LEDs on the front side. BRI 1 and BRI 2 indicate the status of ISDN BRIs and CH 1 and CH 2 indicate the status of each GSM/UMTS module.
  • Page 16 SIM card/GSM module availability. The manufacturer shall not be held liable for any SIM card or provider service unavailability in the case of a breach of the provider's SIM terms and conditions for the SIM card use. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 17: Brief Installation Guide

    It is possible to operate the gateway in another working position too, e.g. on a desk, for a short time for servicing and testing purposes, for example. ® Any excess of the allowed working temperature may not affect the 2N Enterprise / BRI Lite function immediately but may result in faster ageing and lower reliability.
  • Page 18 (BTS) you are currently logged in to. This may lead to a permanent or occasional rejection of GSM/UMTS calls! ® No strong electromagnetic radiation is allowed on the 2N BRI Enterprise / BRI Lite installation site.

  • Page 19: Antenna Connection

    Warning Tighten the antenna connector gently with your hand – never use a wrench ® Being a source of radio frequency emissions, the 2N Enterprise / BRI Lite antenna should not be very close to the human body. The health hazard...

  • Page 20: Power Supply Connection

    Refer to the status indicators. Warning Connecting a defective or inappropriate power supply adapter ® may lead to a temporary or permanent 2N BRI Enterprise / BRI Lite error! Check whether the antenna is connected before plugging the adapter.

  • Page 21: Nt And Te Connectors

    NT/TE connectors depending on the configuration of your telecommunications equipment. They are connected via a 4–wire passive bus with the aid of RJ–45 connectors. Refer to the figure below for the NT/TE connector pin lay–out. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 22 ® TE connector The figure below shows BRI Enterprise / BRI Lite connected as network termination (NT) – extension for your ISDN PBX or ISDN phone, i.e. your own equipment. ® The figure below shows BRI Enterprise / BRI Lite connected as terminal equipment (TE) –...
  • Page 23 Caution ® BRI Lite is equipped with just one ISDN BRI. Hence, two independent devices cannot be connected at the same time! ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 24: Available Isdn Bri Extension Configurations

    You have to know the way of connection of your ISDN devices in order to configure ® your BRI Enterprise / BRI Lite GSM gateway correctly. For information on your ISDN type, check your ISDN extension provider's registration form or contact your telephone network administrator.

  • Page 25: Ip Voice Transmission

    If a codec is requested that is ® incompatible with BRI Enterprise , the call will be rejected. The SIP and ITU–T H.323 recommended protocols are mostly used for connection ® establishing, maintaining and cancelling. gateway uses the (Session Initiation Protocol) signalling. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 26 3XX – request forwarding needed (302 – temporarily moved, 305 – use Proxy); 4XX – error (403 – forbidden, 486 – busy here); 5XX – server error (500 – Server Internal Error, 501 – not implemented); 6XX – global failure (606 – not acceptable). ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 27 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 28: Types Of 2N® Bri Enterprise Connection

    2.5 Types of 2N® BRI Enterprise Connection ® This subsection deals with the types of connection of the BRI Enterprise gatewa y to the main ISDN BRI extension. ® ISDN TE – 2N BRI Enterprise Connection The connection type shown in the figure below provides communication via a GSM/UMTS gateway without PSTN connection.
  • Page 29 With multiple GSM gateways, the connection lay–out is as follows: ® 2N BRI Enterprise Connection as DialThru Router This type of connection saves one BRI port to the PBX. Incoming PSTN calls are treated by the GSM/UMTS gateway in the DialThru mode while outgoing calls are routed according to the LCR table.
  • Page 30 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 31: Making Calls Via Bri Gateway

    This section describes the call routing techniques via an ISDN BRI GSM gateway. The purpose of the settings is to improve your call efficiency and cut your call costs. Here is what you can find in this section: 3.1 Supported 2N BRI Gateway Functions 3.2 Call Routing Principles ®...

  • Page 32: Supported 2N Bri Gateway Functions

    3.1 Supported 2N BRI Gateway Functions Time/destination based call routing B–channel based call routing Intelligent incoming CLIP routing (based on Calling Line Identification Presentation) Auto CLIP routing (automatic incoming call routing to a line stored in the AutoCLIP table) Time LCR (Least Cost Router) based outgoing call routing...

  • Page 33: Call Routing Principles

    3.2 Call Routing Principles ® 2N BRI Lite The gateway is equipped with one BRI ISDN and one VoIP–SIP ports. You can select one of the following incoming call processing modes for each of the ports via the web interface: Use LCR table –...
  • Page 34 ® BRI Enterprise / BRI Lite can also route outgoing calls into the GSM/UMTS networks according to the B–channel used. In that case, the GSM/UMTS module is paired with a specific B–channel of the ISDN BRI line. LCR Table The LCR (Least Cost Routing) table is the key telephone cost cutting factor. It helps you set call routing rules according to the CLIP, daytime and day in a week.
  • Page 35 GSM network within the timeout defined in the DTMF dialling delay , the call is rerouted to the extension included in the List of extensions If call forwarding to extension is inactive, the incoming call is rejected. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 36 8kHz. Name the file Disa.wav and load it via the Gateway control – Voice messages b interface into the gateway. DISA voice message parameters Sound format: Sampling frequency: 8 kHz Channels: 1 mono Codec: ISDN A–law ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 37: First Launch

    4. First Launch Having completed the physical installation, get acquainted with the factory settings and operation of the 2N® BRI Enterprise / BRI Lite gateway. Here is what you can find in this section: 4.1 Ethernet Interface 4.2 Licence 4.3 Firmware Version 4.4 Factory Reset...

  • Page 38: Ethernet Interface

    , p. for details. MAC Address The BRI gateway has a unique, factory–set MAC (Media Access Control) address. Refer to the rear side label of your device or the gateway web interface for the MAC address. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 39 If you use DHCP, you are advised to set permanent assignment of one and the same IPv4 address to the defined MAC address to avoid unexpected change of the gateway IPv4 address and subsequent VoIP–SIP setting errors. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 40: Licence

    Use this section to download a new licence key into your gateway in order to change the current software licence status. Caution 2N® BRI Enterprise / BRI Lite gateway can contain time–limited software licences (for SIP signalling, Mobility Extension, etc.). Such licences are limited to a certain period of time (hours) during which the gateway provides its services.

  • Page 41: Firmware Version

    4.3 Firmware Version Upgrade your 2N® BRI Enterprise / BRI Lite gateway with the latest firmware version available for this GSM gateway type before installation. Refer to www.2N.cz the latest firmware version. Warning Use the firmware certified for this GSM gateway type only to...

  • Page 42: Factory Reset

    Caution By resetting the default configuration values, you change the Ethernet interface settings and have to reconfigure the gateway subsequently. Note Press the Reset button for a short time (0.5 s) to restart the GSM gateway. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 43: Basic Configuration - Step By Step

    Read the User Manual carefully and check all the parameters. Find answers to your questions at http://faq.2n.cz (Frequently Asked Questions). Contact your servicing centre. It is recommended that you should attend certified training courses at 2N to be able to install the whole system successfully. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 44: Introduction To Configuration Interface

    5. Introduction to Configuration Interface ® This section introduces the configuration interface of the 2N BRI Enterprise / BRI Lite product. Here is what you can find in this section: 5.1 Configuration Web Interface Gateway control Gateway configuration Others ®...

  • Page 45: Configuration Web Interface

    5.1 Configuration Web Interface Essential Data ® BRI Enterprise / BRI Lite web interface supports the following web browsers: MS Internet Explorer v9 Mozilla Firefox v4 and higher Any other web browsers may cause troubles. The recommended screen resolution is 1280x1024 and colour quality 32bit and higher.
  • Page 46 Save settings button to save the changes in order to avoid loss of new data after leaving the current configuration window! Set the time limit value in the Gateway – Web configuration – Auto logout section. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 47: Home Page

    Restart – helps you execute the software restart of the GSM gateway. The main window also provides information on the gateway licence status, firmware and bootware versions and BRI gateway Ethernet interface MAC address. You can download a new licence here too. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 48 Contact your dealer please for more information. Licence key for gateway – helps you insert a new GSM gateway connection licence. Caution By inserting a new licence code you restart the GSM gateway and discontinue all the currently made calls! ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 49: Module Status

    The maximum CDR capacity is 962 records. When this value is reached, the oldest records will be deleted automatically! Module status The window displays the current status of each GSM/UMTS channel. Refer to Subs. 6.4 page for more details. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 50: Online Report

    SIP registration The window displays the current state of the gateway SIP registration. ISDN lines The window shows the state of each ISDN BRI interface of the gateway. Online report The window provides online GSM gateway tracing. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 51: Gateway Configuration

    DTMF access codes into the GSM gateway from a registered mobile user number. You can change the function values via the configuration interface too (see below). Others PIN – set the PIN code for the PIN–secured SIM cards. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 52 Send 200 OK instead of 180/183. Send 200 OK and BYE when rejected from GSM. ® Send 200 OK on REGISTER request – virtual registration of device in 2N gateway (for registration requiring equipment). Replace CLIP from GSM with Caller ID.
  • Page 53 Internet via NAT or firewall. The pre–set port for sending requests to STUN is 3478. ® Next STUN request (60–6553, 0=off) [s] – update of information on the 2N gateway public IP address. Use this parameter to configure the frequency of queries routed to the STUN server.

  • Page 54: Isdn Parameters

    ISDN parameters Use this window to set the BRI ISDN port parameters. The appearance and count of ® ® the parameters may be different in BRI Lite BRI Enterprise due to different counts of ISDN BRI ports. BRI mode selection ®...
  • Page 55 Generate busy tone to BRI2 – set the busy tone type to be generated by the BRI gateway into the BRI 2 interface. Numbering plan settings CDN, CGN – use these parameters to set the Numbering plan for the called (CDN) and calling (CGN) numbers. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 56 (if defined in the LCR). Frequency 1;2;3;4 – define the frequencies for the tone to be detected. Sequence list – set the sequence of the tones to be detected. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 57 GSM groups. Cause translation The release cause received from GSM/UMTS can be converted into another ISDN release cause. The resultant ISDN cause number will be converted into a SIP code according to the table below: Conversion table: ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 58 Not implemented Service or option not Not implemented implemented User not member of CVG Decline Incompatible destination Bad request Invalid message Bad request Recover on timer expiry Request timeout Other received CAU from netw. Internal server error ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 59 Call length counting – define whether call minutes or seconds shall be counted. BTS lock – identify the BTS to which the GSM modules shall log in. Restart the selected GSM modules to execute the changes. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 60 Roaming disabled (five digits at least) 23002 Roaming enabled for the 23002 (MCC+MNC) network 230XX Roaming enabled for the 23000 – 23099 (MCC+MNC) network XX001 Roaming enabled for the 00001 – 99001 (MCC+MNC) network XXXXX Roaming enabled for any network ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 61 Day limit of called minutes – set the maximum count of minutes to be called within a day via the selected SIM card. Time limits There are two SIM use time limits in a GSM group. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 62 GSM/UMTS provider's free minute/SMS limit. GSM incoming groups ® gateway allows you to work with two groups of incoming calls. You can set different values for each of them. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 63 Parameter Note Null 420261301500 No CLIP change +420261301500 Add + before CLIP 00420261301500 Add 00 before CLIP – 0261301500 First two digits removed from CLIP First three digits removed from CLIP, prefix 99 –––99 99261301500 added ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 64 Default count of digits – default length of the number to be dialled into the GSM/UMTS networks for routing via the selected prefix list. Use this parameter in case the Digits count is not included in the Accepted prefixes table. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 65 Limit – set the maximum call duration (minutes). Note Remember to activate the CallBack mode in the GSM incoming groups for a proper function. Mobility Extension Use this table to register the Mobility Extension users. Name – user name for calling to VoIP. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 66: Ethernet Configuration

    This function is recommended for direct connection of the GSM gateway to the Internet. Use SMS user for SMS operations on the web – enable/disable a user authorised to send/receive SMS messages only. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 67 SMS user name/password – connect a user with the right to receive/send SMS only. Report configuration Use the window to set details for automatic tracing generated by the GSM gateway. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 68: Configuration Backup

    Subs 4.3 Warning Use the firmware certified for this GSM gateway type only to avoid irreversible damage to your system! When the new firmware file has been uploaded successfully, the GSM gateway will be restarted automatically. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 69 Restart This section provides forced restart of the BRI gateway connected. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 70: Configuration Via Terminal

    6. Configuration Via Terminal ® Communication with the BRI Enterprise / BRI Lite gateway is via the LAN. This connection provides uniform gateway configuring by AT commands. Here is what you can find in this section: 6.1 LAN Communication Setting 6.2 GSM Gateway Behaviour...

  • Page 71: Lan Communication Setting

    6.1 LAN Communication Setting First set the 2N BRI gateway IP address to communicate with the gateway via your LAN successfully. To do so, configure the Ethernet interface; refer to Subs.4.1 . Use any of the available programs (HyperTerminal, Telnet, Putty, etc.) for communication and...

  • Page 72: Gsm Gateway Behaviour

    <ENTER>. A correctly connected gateway should answer . In such case, the gateway starts communicating with a dialogue shown in the figure below. Enter the user name, press <ENTER> and, when being asked so, enter the access Password ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 73: List Of Terminal At Commands

    ...view aux, bris, one module status (ax,px,ex,0..1) &S=info ...view all modules selected info (by at&S##) &Q## ...view signal quality on module 0..1 &QALL ...view signal quality on all modules &L ...view logfile from recent <SPACE...continue> &C ...view buffer (calls) from recent <SPACE...continue> ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 74 ...login name / password (max 15 chars all) System Control AT&Gxx=RESET Reset of GSM module No xx AT&Gxx=BLOCK Block of GSM module No xx AT&Gxx=DOWN Transfer of GSM module into the sleep mode AT&Gxx=ON Transfer of GSM module into the idle mode ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 75 ...dial for dig.call from pri1 (max 15 chars) %I21=xxx ...dial for dig.call from pri2 (max 15 chars) %I127=msn ...MSN number for TE mode %i28=pin (max 15chars) ...PIN (password) for TE–>GSM calls GSM Settings %G02=mode,atms,afms ...tc35 mode (2,4) atms/afms gain (+5dB=3,+2.5dB=1,0dB=0,–2.5dB=2,–5dB=4) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 76 ALERTING on recieveng +CIEV form GSM network,2..20sec after recieving PROCEEDING) conn delay (0..20sec), forced disc (bit0=sim limit, bit1=time limit, bit2=noale) day (0=off,1..31) of clearing group stat, bits 0..255, b0=(notused), b1=min––>calls, b2=(notused) b3=(notused), nasms tout (0=off, 1..20sec) %G9#=mode,min,max,tout,day,dial,clip ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 77 ...pref. list extension (max 63 chars) %N#5=pref/dig,..pref. list extension (max 63 chars) %N#6=pref/dig,..pref. list extension (max 63 chars) %N#7=pref/dig,..pref. list extension (max 63 chars) %N#9=netid,max ...network id (7 chars), default max digits (0..20) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 78 Start tracing of ISDN BRI & GSM on layer xx=1 – Layers 1,2,3,4x=2 – Layers AT!Rx 2,3,4x=3 – Layers 3,4x=4 – Layer 4 AT!RR Start tracing (AT!R2) to COM1 interface AT!RX Stop tracing (AT!R2) to COM1 interface ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 79 Len…SMS length (number of bytes in PDU) *smspdu: Pdu…message content in PDU format ch,ix,sts,len,pdu,csum Csum…Checksum of all PDU bytes (2 hexa digits) calculated without carry SMS message or status confirmation was deleted from *smsdel: ch,ix position ix ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 80: Status Messages

    ISDN Layer 2 Message Status Name Name acc. to ITU–T Q.921 NOTEI TEI Unassigned AWTEI Assigned Awaiting TEI AWTEST Establish Awaiting TEI OKTEI TEI Assigned AWEST Awaiting Establishment AWREL Awaiting Release OKEST Multiple Frame Established TIMREC Timer Recovery ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 81 Channel restart request RSTREQ Restart Request sent Channel restart request RSTART Restart received Management Message Status Name Description INIT Initialization upon BRI reset IDLE Activation – rest status, necessary for layers 2 and 3 DISC Deactivation ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 82 Wrong PIN, permanently in BLOCK status Sim–err Defective or not inserted SIM card, next attempt in 2 minutes Log–out Temporarily logged–out according to parameter X00 Puk–req SIM card requires PUK (undef) This position of SIM card wasn't checked by gateway ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 83 Rest status, ready for call Call request received from GSM or ISDN, awaiting further dialling or MORE timeout SETUP Call request sent to opposite interface PROC Call request confirmed, awaiting call answer ACTIVE Connected call DISC Call disconnection in progress ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 84 BRI port layer 1 error (ISDN1) L2–ERR BRI port layer 2 error (ISDN2) L3–ERR BRI port layer 3 error (ISDN3) G2–ERR GSM module layer 2 error (gate2) G3–ERR GSM module layer 3 error (gate3) C4–ERR Link layer error (call4) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 85 Types of CDRs Name Description I–FD Not connected incoming call attempt I–OK Connected incoming call O–FD Not connected outgoing call attempt O–OK Connected outgoing call ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 86: Log Files

    B: unsol.DM(F) Received packed DM with unexpected bit F=1 C: unsol.UA(F) Received packed UA with unexpected bit F=1 D: unsol.UA(–) Received packed UA with unexpected bit F=0 E: unsol.DM(–) Received packed DM with unexpected bit F=0 ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 87 Error of 3. layer isdn: timeout in status # on module g## (g##) tout sts # Error of 4. connecting layer: timeout in status # on call C4–ERR (p##/g##) between channel p## and GSM module g## ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 88: Call Data Records (Cdr)

    9 – call cost (to be implemented in higher firmware versions) / gateway ID (optional) Column 10 – called party number (CDN) Column 11 – calling party number (CGN) Column 12 – SIM card slot number / SIM card IMSI or SCID (Siemens GSM modules only) ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 89: Statistics - Description

    0:02:21 #bri2 inc ( 0.00) 0:00:00 network (reset) minutes hhhh:mm:ss calls reject failed red.in redout ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– #bri1 out ( 1.12) 0:00:07 #bri2 out ( 1.12) 0:00:00 module (reset) minutes hhhh:mm:ss calls reject failed c.offs smses ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 90 #g00 i ( 0.00) 0:00:07 #g01 i ( 0.00) 0:00:00 module (reset) minutes hhhh:mm:ss calls ekor failed c.offs smses ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– #g00 out ( 0.00) 0:01:24 #g01 out ( 0.00) 0:01:08 End of Module statistics ] ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 91: Technical Parameters

    7. Technical Parameters ® In this section, the technical parameters of the BRI Enterprise BRI Lite produ ct are described. Wireless Mobile GSM 850/900/1800/1900MHz, UMTS/3G at 850/900/1800/2100MHZ – network type according to the module type used SIM card Plug–in 3V („small") Transmission Max.
  • Page 92 S0, point–to–multipoint ISDN TE connection type S0, point–to–point ISDN protocol EuroISDN, DSS–1 ® 1 NT/TE BRI Lite port count + type ® 1 NT + 1 TE BRI Enterprise port count + type ISDN connector type 2 RJ–45 NT interface supply...

  • Page 93: Supplementary Information

    8. Supplementary Information ® This section provides supplementary information on the 2N BRI Enterprise / BRI Lite product. Here is what you can find in this section: 8.1 Directives, Laws and Regulations 8.2 Troubleshooting 8.3 List of Abbreviations 8.4 General Instructions and Cautions ®...

  • Page 94: Directives, Laws And Regulations

    76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC Directive 2011/65/EC of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 95: Troubleshooting

    8.2 Troubleshooting For the most frequently asked questions refer to FAQ.2n.cz ® No LED is shining on BRI Enterprise / BRI Lite ® BRI Enterprise / BRI Lite is disconnected from the power supply. ® BRI Enterprise / BRI Lite fails to log in to the GSM network.

  • Page 96: List Of Abbreviations

    LED (Light Emited Diod) Electric light–emitting semi–conductor component. NT (Network Termination) Network terminal for interconnecting a user line from an ISDN telephone with the provider's external network, a PBX gateway or 2N BRI Enterprise / BRI Lite gateway, for example. PC (Personal Computer)IBM PC compatible personal computer.
  • Page 97 UMTS (Universal Mobile Telecommunication System) 3G system of the mobile phone standard, successor to GSM. UPS (Uninterruptible Power Supply) Source of continuous power supply. USSD (Unstructured Supplementary Service Data) Data transmission standard using GSM signalling channels. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 98: General Instructions And Cautions

    The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 99: Electric Waste And Used Battery Pack Handling

    Make sure that the devices to be disposed of are complete. Do not throw battery packs into fire. Battery packs may not be taken into parts or shirt-circuited either. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 100 2N TELEKOMUNIKACE a.s. Modřanská 621, 143 01 Prague 4, Czech Republic Tel.: +420 261 301 500, Fax: +420 261 301 599 E-mail: sales@2n.cz Web: www.2n.cz MG1877v1.3 ® TELEKOMUNIKACE a.s., www.2n.cz...

This manual is also suitable for:

Bri enterprise

Table of Contents