Table of Contents
Advertisement
Available languages
Available languages
Selecting the Sound Pattern
Check to make whether functions f2
and f3 are turned off. You can tell
this by the LED indicators above
buttons f2 and f3:
LED lit up => function is turned on;
LED is off => function is turned off.
Important: The sound pattern cannot
be changed until functions f2 and f3
are turned off!
Pressing button f1 twice switches
from one sound pattern to the next.
Example: The sound effects circuit is
in its basic state. Pressing button f1
twice switches to sound pattern 2.
You can now turn on a random
sequence of different work sounds
accompanied by the yellow warning
light.
Pressing button f1 another six times
switches you to sound pattern 5.
You can now turn on the sounds of
a compressor and a compressed air
screwdriver. In this way, you can turn
on 11 different work sound effects.
Important: Once you have reached
work sound effects level 11, pressing
button f1 again twice will return you
to work sound effects level 1.
Turning on the Selected Sound
Pattern
Pressing button "f2" turns on the
sound pattern that has been selected
with button "f1". Pressing button "f2"
a second time turns it off again.
Turning on the Sound of a
Warning Horn
The sound of a warning horn can be
turned on by pressing button "f3".
Pressing button "f3"again turns it off
again.
Important: This sound can be repro-
duced only when no other sound is
being generated by the sound effects
circuit.
13
Advertisement
Table of Contents
