Specifying Polling Intervals And The Network Address - Avaya Scopia Installing Manual

Field Name
Gatekeeper Service Prefix
6. Click Save.

Specifying polling intervals and the network address

About this task
You must specify how frequently the Scopia
the conference points and delivery nodes. You must also specify the network on which the Scopia
SR resides. The polling interval should be in proportion to the number of devices. The fewer the
devices, the shorter the intervals. For example, if you have over 200 delivery nodes, Avaya
recommends setting the polling to 5 minutes.
The polling frequency affects the latency between the status transitions of the remote device and the
appearance of the status on the details page for the device.
Procedure
1. Log in to Scopia
2. Click the Global Policies tab.
3. Click General Options.
4. Configure the settings, as described in
Table 8: Polling Settings
Field Name
Conference Point Polling Frequency
Delivery Node Polling Frequency
Network Address for Device Communication
5. Click Save.
June 2015
®
SR communicates with the other components, such as
®
SR.
Installing the Avaya Scopia
Comments on this document? infodev@avaya.com
Specifying polling intervals and the network address
Description
be the same as the one used by Scopia
Management.
This is an optional field. Enter the service prefix
designator for this conference point. You can
leave this field as blank.
Table 8: Polling Settings
Description
Specify how often the Scopia
checks for device configuration or status
changes for each of the conference points.
Specify how often the Scopia
checks for device configuration or status
changes for each of the delivery nodes.
Enter the IP address or the DNS address that
®
the Scopia SR Manager should use to access
the devices in the system.
®
Streaming and Recording Server
®
on page 41.
®
SR Manager
®
SR Manager
®
41