Avaya Scopia Installing Manual page 35

d. Click Enable Services.
e. Under Manage Device, click Configure.
f. Verify that the Manage Registration State is Registered and the Manager Host is the
proper manager IP.
8. (Optional) Verify the registration for the delivery node or virtual delivery node.
a. Type https://<DN IP Address> in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. From the menu bar, click Configuration.
d. Verify that the Manage Registration State is Registered and the Network Address is
the proper manager IP.
9. Register the transcoder.
a. Type https://<CP IP Address> in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. From the left menu bar, click System Configuration.
d. Click Transcoder Configuration.
e. Enter the IP address of the transcoder and click Finish.
Next steps
Return to the Installation checklist
Related Links
Unregistering each of the components
June 2015
Figure 18: Transcoder Registration
on page 18 to see your next task.
on page 36
Installing the Avaya Scopia
Comments on this document? infodev@avaya.com
Registering each of the components
®
Streaming and Recording Server
35