Avaya Scopia Installing Manual page 22

Installing the new streaming and recording server
About this task
Ths task describes how to configure Scopia
provider deployment, the steps vary slightly.
Procedure
1. On the Choose Setup Language dialog, select your preferred language.
2. On the next screen, click Next.
The first time you run the configuration utility, a Welcome screen is displayed.
If you run the configuration utility again, a Warning screen is displayed.
3. On the End-User License Agreement screen, select I accept the terms of the License
Agreement to accept the license agreement.
4. Click Next.
5. On the Select Configuration screen, select your deployment type.
For more information, see
6. On the Deployment Type screen, perform one of the following actions:
• If you have selected All-in-One on the Select Configuration screen, select Enterprise
deployment or Multi-tenant to match your Scopia
Installing the Avaya Scopia
22
®
SR in an enterprise deployment. If yours is a service
Deployment types
Figure 8: Select Configuration
®
Streaming and Recording Server
Comments on this document? infodev@avaya.com
on page 13.
®
Management deployment.
June 2015