Avaya Scopia Installing Manual page 38

Configuring components
5. Configure the settings, as described in
Table 4: Delivery Node Details
Field Name
Name
Version
Parent Delivery Node
WAN Bandwidth Limit
6. (Optional) If you have configured your system to enable individual delivery nodes to specify
the distribution policy, then an additional panel is displayed. Configure the settings, as
described in
Table 5: Override Default Distribution Policy Panel
Field
Unicast Only
Multicast Only
Multicast and Unicast (Unicast Rollover if
Multicast is Unsuccessful)
7. (Optional) Click Advanced Options and configure the settings as described in
Advanced Options
Table 6: Advanced Options
Field
Distribute All Programs
Replace with new DN
8. Click Save.
Installing the Avaya Scopia
38
Table 5: Override Default Distribution Policy Panel
on page 38.
®
Streaming and Recording Server
Comments on this document? infodev@avaya.com
Table 4: Delivery Node Details
Description
Enter a name for the delivery node.
Verify the version and MAC address of the
delivery node.
Select a delivery node. The Parent Delivery
Node distributes content to the delivery node. If
this is a core or parent for the system then leave
this set to None.
Specify the maximum bandwidth, in Kbps, that
this delivery node can use when receiving/
transferring content. If you enter 0 (zero), the
bandwidth is unlimited.
Description
Select to enable only unicasting from the source
delivery node.
Select to enable only multicasting from the
source delivery node.
Select to enable the stream to be unicast from
the source delivery node if the client does not
support multicasting. If you select this option but
multicast facilities are not available on the source
delivery node, the unicast rollover does not
occur.
Description
Select to take all the programs in the system
from other source nodes and copy them to this
delivery node.
Use this setting when bringing on a replacement
delivery node for an older or broken system.
on page 38.
on page 38.
Table 6:
June 2015