Table of Contents
Advertisement
Leica mojo3D, Running the mojo3D for the First Time
Implement setup,
step-by-step
• Use the on-screen keyboard to enter the measurement, tap
• Repeat for the other measurements required.
3. After you have entered all required vehicle measurements, add any required
implements on the same screen. If no implements are required, tap
continue.
To add an implement carry out the following steps:
1. On the vehicle setup screen, tap
An implement button appears in the bar at the top of the screen
and the list of implement types are shown.
2. Tap the implement type in the list at the left of the screen. Tap
to reveal more options.
3. Enter the measurements required for the implement type that you have selected.
• Tap on a field. The on-screen keyboard appears.
• Use the on-screen keyboard to enter data, tap
• Repeat for all measurements required.
.
to continue.
36
to continue.
to
and
Advertisement
Table of Contents
