Leica mojo3D User Manual page 190

Leica mojo3D, mojo3D Enhancements
Override threshold
Testing the auto-
steer function,
step-by-step
The override threshold adjusts the sensitivity of the QuickSteer to detect
the operator moving the steering wheel.
1. Tap the override threshold value field. The on-screen number pad appears.
2. Use the on-screen number pad to enter a value for the override threshold. Tap
on the number pad when finished.
3. Tap to continue.
To perform a test on the auto-steer system, carry out the following steps:
1. On the main navigation screen, tap the auto-steering settings button.
2. On the flyout menu, tap the auto-steer test button. The steering
kit information screen appears.
3. Check that the steering kit is active. If the kit is not active, check that the engage
switch is on, then tap
4. Check that the manual steering of the vehicle is safe and satisfactory. Tap the
OK button.
5. Stop the vehicle and centre the wheels. Tap the OK button.
6. Engage the QuickSteer motor against the steering wheel. Tap the OK button.
to continue.
190