Leica mojo3D User Manual page 33

Time specification,
step-by-step
Units selection,
step-by-step
Mode selection,
step-by-step
Leica mojo3D, Running the mojo3D for the First Time
1. On the UTC Time screen, tap
an offset from UTC (Coordinated Universal Time) time. Each tap will change the
time offset by 30 minutes.
2. After selection, tap
1. On the units selection screen, tap the buttons to select:
• Lengths may be measured in metric, Imperial, or US Standard units.
• Speeds may be measured in metric, Imperial, or US Standard units.
• Areas may be measured in metric, Imperial, or US Standard units. The Imperial
acre is the defined international acre, and the US acre is the slightly smaller US
Survey acre.
2. After making your selections, tap
1. On the mode selection screen, tap the buttons to select:
• top-down mode: either north is at the top of the map screen, or the direction
of the front of the vehicle is at the top of the map screen, and
• display mode: day mode, night mode, or automatic switch between modes.
2. After making your selections, tap
and to enter the local time, expressed as
to continue.
to continue.
to continue.
33