Leica mojo3D, mojo3D Enhancements
a) Port expansion cable
b) Electric auto steer kit
Power:
•
The power supply for the Electric Steer Kit must be able to supply 5 A continu-
ously from a permanent 12 V supply.
•
If the multi section control kit is also being used, the power supply must be able
to supply 13 A continuously at 12 V, and the multi section control kit must be
connected closest to the power source.
•
A 5 m (16.4 ft) cable is supplied so that direct connection to the battery is
possible if required.
•
The Orange ignition wire may be connected to a switched ignition power source.
c) Multi section control kit
d) Bus power cable
185