Download  Print this page

Advertisement

NOTE
<Total Prints> is the sum of <Copy> and <Print>.
4
To register a new User, click [User Management Settings] ➞
specify the necessary fields on the Register New User page ➞
click [OK].
3
You can also display the Register New User page by clicking [New] in step 1.
The following describes the details of each item.
User ID:
Set Password:
Password:
Confirm:
Department ID: Enter the Department ID number the user belongs to (seven
Set Password:
Password:
Confirm:
User Type:
Display Name:
E-mail Address: Enter the e-mail address of the user.
3-12
Managing Department and User IDs
Enter a User ID (a log-on name) (32 characters maximum).
Select this check box to set a password for the User ID.
Enter the password (32 characters maximum).
Enter the password again. If the character you enter here is
different from the character entered for [Password], an error
dialog box appears.
digits maximum). If Department ID Management mode is set,
be sure to assign the user to a department. Otherwise, the user
cannot log on to the machine.
Select this check box to set a password for the Department ID.
Enter the password (seven digits maximum).
Enter the password again. If the number you enter here is
different from the number entered for [Password], an error
dialog box appears.
Classify the user in two categories [User] (End-User Mode) or
[System Manager] (System Manager Mode).
Enter the user name.

Advertisement

Table of Contents

This manual is also suitable for:

Imagerunner 2422Imagerunner 2420

Comments to this Manuals

Symbols: 0
Latest comments: