Download  Print this page


Nothing has to be entered if System Manager ID and password have not been registered.
To specify the password:
Click [Add.Func.] ➞ [System Settings].
Click [Edit] on the right side.
Click [Register ID and Password] on the right side.
Select [Set ID and Password] check box.
Select [Set Password] check box.
Enter Password for [System Manager Password] and [Confirm].
Click [OK].
You can enter a password up to 7 numeric characters maximum.
(See "To set the System Manager ID and password:," on p. 3-6.)
You can change the password only when you are in the System Manager Mode.
Starting the Remote UI


Table of Contents

This manual is also suitable for:

Imagerunner 2422Imagerunner 2420

Comments to this Manuals

Symbols: 0
Latest comments: