Download  Print this page

Advertisement

● When Department ID Management is set to 'On':
The Remote UI page is displayed.
1
NOTE
To specify the password:
Click [Add.Func.] ➞ [Department ID/User Management].
Click [Settings] on the right side.
Click [Department ID Management Settings].
Enter ID for [Department ID].
Select [Set Password] check box.
Enter password for [Password] and [Confirm].
Click [OK].
You can enter a password up to 7 numeric characters maximum.
(See "Managing Department and User IDs," on p. 3-8.)
You can change the password only when you are in the System Manager Mode.
When you want to use Remote UI in the System Manager Mode, register System
Manager ID and Password before setting [Department ID Management] to 'on'. (See "To
set the System Manager ID and password:," on p. 3-6.)
1-12
Starting the Remote UI
Enter the URL into [Address] or [Location] field.
http://<the IP address of the device>/
Enter Department ID and Password.

Advertisement

Table of Contents

This manual is also suitable for:

Imagerunner 2422Imagerunner 2420

Comments to this Manuals

Symbols: 0
Latest comments: