Canon IR 2420 Remote Manual page 24

● When User ID Management is set to 'On':
❑
Enter the URL into [Address] or [Location] field.
http://<the IP address of the device>/
The Remote UI page is displayed.
❑
Enter User ID and Password.
NOTE
•
To specify the password:
Click [Add.Func.] ➞ [Department ID/User Management].
Click [Settings] on the right side.
Click [User Management Settings].
Enter ID for [User ID].
Select [Set Password] check box.
Enter password for [Password] and [Confirm].
Click [OK].
You can set a password 32 characters maximum. Passwords are case-sensitive.
(See "Managing Department and User IDs," on p. 3-8.)
•
You can change the password only when you are in the System Manager Mode.
•
We recommend that you register a user as the System Manager first, and then, register
users as End Users.
2
Click [OK].
Starting the Remote UI
1
1-13