Download  Print this page

Advertisement

Specify the necessary fields ➞ click [OK].
The following describes the details of each item.
Set ID and Password:
System Manager ID:
Set Password:
System Manager Password:
Confirm:
Permit End-User's Job Operation: When this check box is selected, print jobs
After you have entered the necessary information, click [OK].
By clicking [OK], the setting values you entered or changed are set.
Select this check box to set the System
Manager ID and password.
Set the new System Manager ID (seven
digits maximum). System Manager ID is
appeared, when Department ID
Management is 'on'. (See "Managing
Department and User IDs," on p. 3-8.)
Select this check box to set the System
Manager password.
Set the new System Manager password
(seven digits maximum).
Enter the new password again. If the
number you enter here is different from the
number entered for [System Manager
Password], an error dialog box appears.
can be deleted in the End-User Mode under
the user name entered when logging on.
Customizing System Settings
3
3-7

Advertisement

Table of Contents

This manual is also suitable for:

Imagerunner 2422Imagerunner 2420

Comments to this Manuals

Symbols: 0
Latest comments: