Cordless Handset Key Descriptions; Components - Cisco SPA302D Owner's Manual

Cordless Handset Key Descriptions

The Cordless Handset has a front keypad as well as side keys.
These keys can be used to customize your Cordless Handset as
well as make and manage calls. The following table describes the
keys on the key panel of your Cordless Handset.

Components

1. Earphone speaker.
2. Handset display.
3. Right softkey-Press the softkey to perform the action shown
in the lower right of the Handset display.
4. End Call button-Press the button briefly to end a call.
Press the button and hold it to turn the Handset on and off.
5. Dial keypad.
6. Mute button.
7. Microphone.
8. Speakerphone button—Press this button during a call to use
the speakerphone.
9. Start Call button.
10. Left softkey—Press the softkey to perform the action shown
in the lower left corner of the Handset display.
11. 4-way navigation keypad—Press the arrow buttons to move
up, down, left, or right through menus displayed on the Han
set.
12. Center Select button.
13. Headset port.
14. Speakerphone speaker.
24
Owner's Manual