Redialing A Call; Putting A Call On Hold; Using Call Waiting - Cisco SPA302D Owner's Manual

move the cursor in the number field, and the Back softkey to
delete characters.
• Edit: Edit the name and number for the contact. You can also
assign a ringtone for the contact. Press Save to save your
changes.
• Delete: Deletes the selected contact. Press Confirm to de-
lete.
• Delete All: Deletes all contacts. Press Confirm to delete all
contacts.

Redialing a Call

To redial the last number called,
1. Press the Left softkey to select Options.
2. Select Redial.

Putting a Call on Hold

To put a call on hold:
1. Press the Left softkey to select Options.
2. Scroll to Hold and press the center Select button.
The Hold icon and on-screen message indicates a call is on hold.
To resume the call:
1. Press the Left softkey to select Options.
2. Scroll to Resume and press the center Select button.
The Active Call icon indicates the call is active again.

Using Call Waiting

If Call Waiting is enabled, while on a call, a beep tone will alert
you of a second incoming call.
To answer the call:
Press the Left softkey to select Answer (the first call is placed on
hold.)
To ignore the call:
Press the Right softkey to select Ignore.
To return to the first call, do one of the following tasks:
• Press the Right softkey to select End Call
active call and return to the call on hold.
• Press the Left softkey to select Options and choose Swap to
place the current call on hold and return to the first call.
The active call is shown at the top of the screen and is indicated
by the active call icon.
31
to end the
Owner's Manual